Impact crusher experience experience

First of all, let's introduce what is impact crusher: 

This machine is a new type of stone crusher produced on the basis of domestic and foreign impact crusher combined with the present advanced crushing technology. This machine has the advantages of impact crusher and hammer crusher. This machine is mainly used for medium and small crushing cement raw material and clinker, for crushing construction sand, iron ore, sandstone, gypsum, coal gangue, lump coal and other medium and hard ores. It has the features of large crushing ratio, low energy consumption, smooth operation, simple structure, easy operation and maintenance. The machine really realizes the function of multi-purpose, high efficiency and low cost. 

The use of this impact crusher and product structure features: 

1. The machine can effectively handle materials with large moisture content and prevent the blockage of crusher. 

When handling materials with excessive moisture content, the feed chute and impact plate of the vertical impact crusher can be equipped with a heating device to prevent the material from bonding. Vertical impact crusher does not need to be equipped with bottom screen plate to effectively prevent blockage phenomenon. In contrast, the hammer crusher cannot be heated to prevent material bonding and must be equipped with a bottom screen, which increases the possibility of blockage. 

2. The impact crusher is suitable for both soft and very hard materials. 

The hammer is mechanically clamped to the rotor and has a large rotational inertia when rotating with the rotor. Compared with the hammer crusher (the hammer head is hanging), the rotor of this machine has greater momentum, which is suitable for crushing harder materials, and the energy consumption of this machine is also very low. 3.

3. The machine can easily and flexibly adjust the size of the discharge, and the adjustment range is wide. 

The machine can be adjusted in several ways to deal with the particle size, the method is flexible, adjust the gap between the hammer plate and grinding chamber, etc.. In addition, it is to adjust the rotor running speed.

Because of the unique structure design of the machine, the wear and tear of the machine's wearing parts is smaller than that of the hammer crusher, and the material utilization rate is higher. 

The wear and tear of the hammer is only on the side facing the material. When the machine is in normal operation, the material is crushed by the hammer plate, but the back and side of the plate hammer are not worn. The metal utilization rate of the hammer can be as high as 45%-48%, which is incomparable to the general crusher. 

5. The machine is easy to replace spare parts and reduce maintenance cost. 

The machine is installed with six plate hammers, which are easy to replace, greatly saving maintenance time and improving production efficiency. 

We are a professional manufacturer of crushing and grinding equipment, we will provide you with advanced crusher and grinding equipment and perfect service! Click customer service for free consultation, 24 hours online, looking forward to hearing from you.