How to maintain the stone sand making machine
In the actual use of many customers do not know how to maintain the stone sand making machine, the following I will introduce for you.
Our company's stone sand making machine can be divided into two main categories, one is the mining sand making machine, that is, in the mining industry out of the ore, need to crush grinding used, workers will need to be mined into blocks of ore crushed into the size they need, this time will often use the sand making machine. Another kind of sand making machine is crushing stone, which mainly crushes some rocks and stones to make sand and gravel, used in the construction industry and road infrastructure industry construction, but in addition to the largest two categories, sand making machine can actually have more subdivided types, such as according to the material it is made to divide it into iron sand making machine and sand making machine, etc.. Our company mainly produces PCL (Vertical Shaft Impact Crusher) and the new 6X sand making machine, the following is an introduction to the maintenance and care of sand making machine.
Although we use high quality steel, and some wearing parts inside the machine are made special treatment. But we should still pay attention to its maintenance, which can increase the service life of the machine, reduce operating costs and the chance of failure.
The first article should regularly stop and open the observation door to observe the internal wear of the impact sand making machine, the wear degree of the central feeding tube, cone cap, impeller upper and lower runner liner, circumferential guard plate, wear block, wear should be replaced or repaired in time, after replacing the wear block to ensure that the weight of each wear block is the same.
The second sand making machine drive triangle tape tensioning force size should be adjusted appropriately to ensure that the triangle tape is evenly stressed, double motor drive, both sides of the triangle tape should be grouped to match the length of each group to make it as consistent as possible, so that the sand machine equipment can be more energy efficient production.
The third is our company according to the stone sand making machine production time required to do some maintenance, the machine work to 400 hours should be appropriate amount of grease, to work to 2000 hours when you need to open the spindle assembly for cleaning, work to 7200 hours after the time must be replaced with new bearings. It is strictly forbidden to repair and maintain the machine when it is working. After the maintenance, we must confirm whether the observation door of the vortex cavity is closed tightly to avoid the danger of material rushing out from the observation door after the machine starts.
Do a good job of mechanical maintenance to avoid unnecessary damage. We are a professional manufacturer of crushing and grinding equipment, we will provide you with advanced equipment and perfect service! Welcome customers to visit us, negotiate business, cooperate sincerely and create brilliant future together. Click customer service for free consultation, 24 hours online, looking forward to hearing from you.
