How to improve the productivity of cone crusher

There are many factors influencing the productivity of cone crusher, through the analysis of these factors, we came up with how to improve the productivity of cone crusher, there are four main points as follows:

1. Strictly control the nature of the incoming material

One is to prohibit the entry of too hard materials, while non-crushing materials should be strictly prohibited from entering the crushing chamber during production. Second is to control the particle size composition of the material, prohibit the size of too large material into, however, for the fine powder content of the material should be sieved in advance. Third, control the moisture content of the material, and sun and dry the material with more water to avoid the material sticking to the inner wall of the crushing chamber.

2. Improve the crushing cavity type

The structure of the crushing cavity determines the productivity, power consumption, liner wear and uniformity of particle size, etc. By improving the design of the crushing cavity of the cone crusher, measures such as increasing the volume of the upper cavity of the crushing cavity, shortening the length of the parallel zone and reducing the angle of the cavity are proposed, so that the material can easily form a thick layer in the crushing cavity, which is conducive to the laminar crushing of the material and improves the crushing effect of the material, and can increase the This is conducive to the formation of thick material layer in the crushing cavity, which is conducive to the laminar crushing effect of the material, and can increase the crushing times of the ore in the crushing cavity to improve the productivity of the equipment.

3. Reasonable working parameters

The working parameters of the cone crusher have a direct influence on the characteristics of the material movement, which in turn has an important impact on the productivity of the equipment, so the working parameters of the equipment should be reasonable in production. In order to improve the productivity of the equipment, the cone crusher cavity design is generally improved and equipped with the best working parameters, such as the length of the parallel zone, the bottom cone angle of the moving cone, the number of times the moving cone swings and the stroke of the moving cone, so that the cavity shape matches the other parts of the equipment and maximizes the productivity of the equipment.

4. Increase the crushing force of the equipment.

The spring tightness affects the size of the crushing force of the equipment, when the spring pressure is not enough, the crushing force of the equipment will be reduced, so in production to ensure that the spring tightness is moderate. On the other hand, the crushing force of the cone crusher can be increased by increasing the diameter of the safety cylinder and increasing the oil supply pressure of the hydraulic station.

If you are interested in our products, welcome to consult our customer service, or leave a message to tell us what specific requirements and questions you have about our products, we will contact you as soon as possible.