How to maintain the VSI series sand making machine
The development of sand making machine can not be separated from the technical innovation, there is innovation to make the equipment in the performance of better meet the requirements of manufacturers, but only innovation is not enough, but also a good solution to the maintenance of equipment in the production line. The market demand for sand and gravel material is very large, which makes the market sand making machine equipment models and types are increasing, VSI series sand making machine is one of them, the same as other types of sand making equipment, the equipment in the production process will also encounter some problems, so must be used to maintain in order to better solve these problems, in order to help the equipment to work better, this article In order to help the equipment work better, this article will introduce the VSI series sand making machine how to maintain the problem.
1. first of all is the sand making equipment in the start before the inspection work, check whether the cavity observation door is closed, if not closed, to close, in order to prevent material flying out of the staff danger, and the equipment lubricating oil should also be checked, according to the situation to add lubricating oil, but also according to the specific environment to choose the type of lubricant;
2. Secondly, it is necessary to check whether the power supply of VSI series sand making machine is connected to normal, there is no overload and adjust the motor speed according to its own discharge requirements, but also check the sand making machine production line other supporting equipment is normal, conveyor is in place to ensure that the normal working environment of the pebble sand making machine;
3. again is the VSI series of mechanical sand equipment must be started in the correct order, is generally installed in the following order to start: feeder - jaw crusher - sand making machine - vibrating screen - sand washing machine, in the shutdown need to follow the reverse order to operate;
4. Finally, it is necessary to ensure that the normal feed rate and volume of the equipment in the production process, in strict accordance with the requirements of the equipment feed size, prohibit the feed of metal substances and large pieces of stone, in case it will cause damage to the parts of the equipment, in the process of production, if found in the cabin of violent vibration or loud noise, should be stopped in time to check, timely treatment.
The above is mainly introduced in the VSI series sand making machine production line how to maintain the problem, a total of four recommendations are given, these maintenance measures can reduce the frequency of damage to the equipment in the production, so that the equipment better serve the sand production line.
The sand production line is mainly based on the rock hardness and the customer's requirements for product size, according to different production site conditions, we provide customers with a comprehensive process program and technical support, and also according to the actual installation conditions of customers to design non-standard supporting components. For more details, please contact our customer service, 24 hours online free consultation.
