Six prohibited operations in the use of the crusher

1. Prohibit the operation without reading the instructions

After the purchase of equipment should be carefully read the crusher related instructions material, familiar with the use of the crusher and maintenance conditions, in the case of unskilled must not operate their own, so as not to bring unnecessary accidents, it is best to be present by professionals. 

2. Prohibit the operation of the machine with something inside

Before the crusher starts working, check whether there are any ore or anonymous pieces in the crushing chamber. Crusher is not allowed to start with load, starting with load will cause electrical tripping or damage to machine parts, so check the crushing cavity before driving, if there are ore or iron pieces, it must be cleared before starting. 

3. Prohibit the use of unqualified power supply

Use unqualified power supply, do not put more electrodes without good roasting, pay attention to the electrode quality when putting down the electrode and within a few minutes after putting down the electrode, move the electrode as little as possible or do not move the motor, take various measures to prevent the electrode from breaking softly. Once soft breakage occurs, deal with it immediately. 

4. Prohibit working without wearing personal protective equipment

There will be noise and pollution when crushing something, and this has great harm to our body for a long time, so pay attention to bring good personal protective equipment before operation to reduce the harm of crusher to us. 

5. prohibit only use without maintenance

For crusher maintenance is quite important, long-term use will bring unnecessary wear and tear on the machine, so regularly check the degree of wear and tear on the machine, regularly to do maintenance, and regularly on the R&W oil, so that your machine play a greater role. 

6. Prohibit power failure without turning off the power

In the use of a sudden power failure, remember to be sure to turn off the power, sudden incoming calls will cause unnecessary injury. At the end of the work should also organize things, turn off the power to leave, to develop a good habit of work.

Please be aware of the above six taboos, so that the safe production and more efficient production are helpful. If you have questions about the crushing and grinding equipment, welcome to consult customer service to learn more, 24 hours free consultation.