What are the reasons for the low sand output rate of river pebble sand-making machines

The sand-making machine has poor production output and low sand output. I would like to know why. In actual production, the output of the sand-making machine is influenced by various factors such as material hardness, moisture content, finished sand fineness, equipment maintenance, and equipment quality. Different crushing materials have varying degrees of hardness, viscosity, and moisture content, and the sand output of the sand-making machine will vary depending on the type of material being crushed.

The specific circumstances are as follows:

1. The higher the viscosity of the material, the greater the likelihood of adhesion. Highly viscous materials tend to adhere to the inner walls of the sand-making chamber. If not cleaned promptly, this can severely impair the sand-making machine's efficiency and even disrupt its normal operation. Therefore, when selecting materials, it is essential to ensure their viscosity is not excessively high.

2. The higher the content of fine particles in the material, the greater the impact on sand production, as these fine particles are prone to adhesion and can obstruct material flow. Therefore, for materials with high fine powder content, it is advisable to pre-screen the material to remove as much fine powder as possible to avoid affecting the operation of the sand-making machine.

3. Material moisture content: When materials are crushed in the sand-making machine, if the moisture content is high, they are prone to adhesion, which can cause blockages during material discharge and conveying, leading to reduced production output of the sand-making machine. Therefore, when selecting materials, it is essential to strictly control the moisture content of the material. If the material's moisture content is too high, it can be reduced by sun-drying or air-drying.

4. Material hardness The harder the material, the more difficult it is to crush, and the more severe the equipment wear. This indicates that materials with moderate hardness should be selected when choosing materials.

The higher the requirements for finished sand of different fineness, i.e., the finer the finished material, the lower the sand-making capacity. This is related to the needs of sand-making users, and the material fineness is generally medium-fine. Differences in sand-making machine models Each manufacturer's sand-making machine models have certain differences, and different models have varying sand output and energy consumption during operation.

Users should have a clear understanding of their production needs when purchasing equipment to select an appropriate sand-making machine; otherwise, it may not only affect production output but also result in higher costs. Proper operation and regular maintenance Proper operation and regular maintenance of the sand-making machine are crucial and also affect the equipment's sand output. The continuity and uniformity of feeding have a significant impact on crushing. Continuous and uniform feeding not only ensures normal production but also improves productivity. If the sand-making machine is not operated properly or maintained regularly, it will accelerate the wear of wear-prone parts, significantly reduce the equipment's service life, and decrease output.

High-quality sand-making machines are not only energy-efficient and environmentally friendly but can also easily achieve the expected output. High-quality manufacturers will use new wear-resistant materials and adopt leading production technologies to produce equipment that meets users' production needs.

Our company has specialised in the research, development, and manufacturing of large-scale mineral crushing and sand-making equipment for over 40 years, serving as an integrated source company encompassing R&D, production, sales, and service. Our main products include jaw crushers, cone crushers, impact crushers, sand-making machines, mobile crushing plants, ball mills, and production line auxiliary equipment. We welcome all customers to visit our factory for on-site inspections. Click on the website customer service for free consultation, available 24/7.