Buy a used sand screw washer for silica sand 75 tph in Malaysia

For silica sand producers in Malaysia – from Perak and Johor to Sarawak – purchasing a used sand screw washer offers a capital‑smart way to upgrade product purity for glass, foundry, or construction applications. A well‑maintained used screw washer can remove clay, silt, and iron stains at 40‑60% less cost than a new unit, while delivering comparable performance. When you buy a used sand screw washer for silica sand 75 tph in Malaysia, you need a factory‑reconditioned machine with genuine wear parts and a warranty. OCP Mechanical Company, a direct manufacturer with over 40 years of experience, supplies certified used Type W sand screw washers that are fully inspected, rebuilt, and backed by a limited warranty, with local support and 24/7 online assistance.

Note: Product data are constantly updated; for current inventory of used sand screw washers, please contact our online customer service.

Why a used sand screw washer is a practical choice for Malaysian silica sand

Silica sand often contains clay, silt, and iron‑bearing impurities that must be removed to achieve >99% SiO₂ for glass or ceramic applications. A sand screw washer uses a single‑shaft screw (1,000‑1,200 mm diameter) to scrub and lift sand while impurities overflow. Polyurethane wear shoes prevent metal‑to‑sand contact, preserving purity. A used washer, when reconditioned with new wear shoes, bearings, and seals, can deliver the same washing efficiency as a new unit. Many Malaysian silica sand processors have successfully used reconditioned screw washers, reducing capital outlay and achieving consistent product quality.

Note: Product data are constantly updated; the latest specifications should be confirmed with our online customer service.

What to check when buying a used sand screw washer

To confidently buy a used sand screw washer for silica sand 75 tph in Malaysia, inspect or request a report on these key components:

• Screw shaft and flight – Check for straightness and wear. Worn flights reduce lifting capacity.

• Wear shoes – Polyurethane shoes should be intact; replace if cracked or worn beyond 50%.

• Gearbox – Listen for unusual noise or oil leaks. OCP reconditioned units include serviced gearboxes.

• Trough liners – Inspect for holes or excessive wear; replace if needed.

• Bearings and seals – Worn bearings cause shaft misalignment. OCP replaces bearings as part of reconditioning.

• Water injection nozzles – Ensure they are not clogged; replace with stainless steel for corrosion resistance.

OCP’s used washers are disassembled, inspected, and rebuilt with new polyurethane wear shoes, bearings, seals, and gearbox oil. We provide a 6‑month warranty on the shaft and gearbox – giving you peace of mind.

All price information in this article is for reference only; contact our team for a current, site‑specific quote.

Price range and savings compared to new

A reconditioned used sand screw washer for 75 tph ex‑works typically ranges from $12,000to$25,000 USD – compared to $25,000‑$45,000 for a new unit. Shipping to Malaysian ports (Port Klang, Penang, Johor Bahru) adds $3,000‑$6,000. A starter set of polyurethane wear shoes, bearings, and V‑belts adds $800‑$1,500. Total landed cost is approximately $16,000‑$33,000 USD, saving you 40‑60% over new.

Many Malaysian silica sand plants have recovered the purchase price within 6‑12 months through lower initial investment and continued high‑purity production.

How to buy a used sand screw washer in Malaysia

To buy a used sand screw washer for silica sand 75 tph in Malaysia, simply click the live chat icon on this page. Provide your feed sand characteristics (clay percentage, target purity), and site location. Within 2‑4 hours you will receive a list of available units with hours, reconditioning work done, and price. You can request a video inspection of the washer running under load. After selection, we arrange shipping and provide remote installation guidance. Actual washing efficiency depends on feed characteristics; for a site‑specific recommendation, consult our engineers.

OCP keeps common wear shoes and spare parts in our regional warehouse for fast delivery to Malaysia. We also offer a rent‑to‑own option for qualified buyers.

Why OCP is your trusted source for used sand screw washers in Malaysia

Choosing to buy a used sand screw washer for silica sand 75 tph in Malaysia is a smart financial decision – but you need a supplier who delivers quality reconditioned equipment and after‑sales support. OCP Mechanical Company has four decades of experience in sand processing equipment for the Asian market. Our 24/7 online team helps with weir adjustment, speed tuning, and troubleshooting. We invite you to request a no‑obligation quote and factory‑direct reconditioned equipment.

For a no‑obligation buy a used sand screw washer for silica sand 75 tph in Malaysia, simply click the live chat icon on this page. Our online customer service team is available 24 hours a day, 7 days a week, to provide free price quotes, equipment recommendations, and installation advice – helping you produce high‑purity silica sand with lower capital investment.