Cost of cone crusher for wolframite ore 85 tph in Rwanda

For tungsten mining operations in Rwanda – particularly in the Karagwe-Ankole belt around Rulindo, Nyamabuye, and Gifurwe – wolframite (Fe,Mn)WO₄ is a key ore. Wolframite is moderately hard (Mohs 5‑5.5) and can be abrasive, often associated with quartz. A cone crusher is widely used for secondary or tertiary crushing to produce a consistent 10‑20 mm product for jigs and shaking tables. Understanding the cost of cone crusher for wolframite ore 85 tph in Rwanda helps you plan a reliable, cost‑effective crushing circuit that maximizes recovery and minimizes operating expenses. OCP Mechanical Company, a factory‑direct manufacturer with over 40 years of experience, supplies Type C cone crushers designed for African hard rock conditions, backed by 24/7 online support.

Note: Product data are constantly updated; the latest specifications should be confirmed with our online customer service.

Why a short‑head cone crusher is a practical choice for wolframite

Wolframite ore is often crushed to a fine product (P80 8‑15 mm) before gravity separation. A short‑head cone crusher with a fine cavity and hydraulic CSS adjustment is a widely used configuration. For 85 tph, a Type C-85 short‑head cone crusher (110‑132 kW motor) operating at a CSS of 8‑12 mm can reliably deliver 80‑95 tph of minus 12‑15 mm product. The steep crushing chamber and long parallel zone produce a well‑shaped product with minimal fines – important for downstream gravity recovery. Many Rwandan tungsten operations have successfully used this crusher size, reporting consistent mill feed and acceptable liner wear. Note: Product data are constantly updated; the latest specifications should be confirmed with our online customer service.

Key features that lower your cost per ton of wolframite

When you evaluate the cost of cone crusher for wolframite ore 85 tph in Rwanda, focus on features that directly affect operating expenses. Hydraulic CSS adjustment allows operators to compensate for liner wear in minutes without stopping the crusher – a valuable advantage for remote sites where downtime is costly. Mn18%+Cr liners offer 30‑50% longer wear life than standard Mn14% in abrasive wolframite, typically lasting 1,200‑1,800 hours. A variable frequency drive (VFD) saves 8‑12% on electricity by optimizing eccentric speed. A dust seal kit with high‑efficiency air filter protects internal components from the dusty environment of a tungsten mill. For ores with high quartz content, consider Mn22% liners for extended life.

All price information in this article is for reference only; contact our team for a current, site‑specific quote.

Compared to other suppliers, OCP’s factory‑direct model typically saves 15‑20% on both the crusher and genuine wear parts, with predictable annual maintenance costs.

Price range and delivery to Rwanda

The cost of cone crusher for wolframite ore 85 tph in Rwanda ex‑works for a Type C-85 short‑head cone crusher with hydraulic CSS and Mn18%+Cr liners ranges from $55,000to$85,000 USD. Manual thread adjustment (without hydraulics) reduces the price by $6,000‑$10,000 but requires more downtime for setting changes. A VFD adds $4,000‑$7,000. Shipping to Dar es Salaam (Tanzania) or Mombasa (Kenya) then overland to Rwanda adds $10,000‑$18,000. A starter set of cone liners, dust seals, and hydraulic filters adds $4,000‑$6,000. Total landed cost is approximately $75,000‑$120,000 USD.

Many Rwandan tungsten operations have recovered the crusher investment within 12‑18 months through improved grinding efficiency and reduced recirculation.

How to get an accurate cost estimate for your Rwandan wolframite operation

To receive a firm cost of cone crusher for wolframite ore 85 tph in Rwanda, provide OCP’s engineers with your feed size (e.g., 60‑100 mm), desired product size (e.g., 8‑12 mm), ore abrasion index (if known), and site location. We will recommend the optimal cavity (fine or extra fine), CSS range, and liner alloy. For wolframite with hard quartz gangue, Mn18%+Cr is strongly recommended. If your operation is at high altitude (e.g., >1,500 m), we can suggest motor derating adjustments. OCP offers a free throughput simulation and a detailed quotation with line drawings. We also provide remote commissioning and operator training via video call – a valuable advantage for remote African sites.

Installation and maintenance tips for Rwandan conditions

Rwanda’s climate and remote site logistics require careful planning. Install the crusher on a reinforced concrete foundation with vibration isolation pads. Ensure the lubrication system has an oversized oil cooler if ambient temperatures exceed 30°C. For sites with unreliable grid power, consider a diesel‑electric drive or a soft starter to reduce inrush current. Keep a spare set of cone liners, dust seals, and hydraulic filters on site – shipping from overseas can take 4‑6 weeks. Train local maintenance personnel on CSS measurement, liner change procedures, and hydraulic system checks using OCP’s remote video guidance.

Why OCP is your trusted cone crusher supplier for wolframite in Rwanda

Choosing the right cost of cone crusher for wolframite ore 85 tph in Rwanda is only part of the investment – you also need a partner who supports you with technical advice and responsive after‑sales support. OCP Mechanical Company has four decades of experience in crushing equipment for the African mining sector. Our 24/7 online team helps with CSS tuning, liner selection, and troubleshooting. We keep common cone liners and wear parts in our regional warehouse for fast delivery to East Africa. We invite you to request a no‑obligation quote and experience factory‑direct pricing.

For a no‑obligation cost of cone crusher for wolframite ore 85 tph in Rwanda, simply click the live chat icon on this page. Our online customer service team is available 24 hours a day, 7 days a week, to provide free price quotes, equipment recommendations, and installation advice – helping you crush wolframite efficiently and profitably.