Calcite crusher bearing wear repair problems

Bearing is a more important part in the ore crusher, it is very important for the ore crusher, long time crushing and processing operation will also lead to the bearing wear problem of the ore crusher, today take the calcite crusher as an example and talk to you about the shaft wear repair process.

For the calcite crusher shaft wear problem, to see the crusher shaft wear repair site conditions:

1. Observe the situation of the equipment and the operating environment, clean up the oil and impurities, and measure the relevant data;

2. Bake oil on the surface of the worn parts, and then polish off the surface oxidized layer and high points;

3. Clean the surface to be repaired with anhydrous ethanol, dry and spare;

4. Apply SD7000 release agent to the reference position on the shaft and the position to be protected;

5. Proportionally blend the Soray carbon nanopolymer material until it is uniform and colorless, then apply the material to the surface to be repaired;

6. Use a datum scraping tool to scrape the material to size along the shaft datum and wait for the material to cure;

7. After the material is cured, sand to remove excess material and install the part back to complete the repair.

We are a professional manufacturer of crushing and grinding equipment, welcome to click on customer service to understand the price of equipment, production cases and other detailed information, 24 hours online free consultation.