How to install dust collector for common crusher

Crusher is mainly for a variety of stone crushing, common types of crushers are jaw crusher, cone crusher, impact crusher. Different types of crushers can crush different sizes of stone, and the size of the production output is not the same, there is a big difference. How to install the dust collector in the crusher needs to consider your working environment and crusher application, choose the dust collector that matches with the crusher model, and the following and we will talk about the installation method.

The dust produced by the crushing equipment is raised by the running parts of the equipment when the lumpy materials are crushed. Due to the large particle size of the crushed material, there are more coarse particles in the dust, so the crushing of limestone is generally used cyclone dust collector or diffusion cyclone dust collector. Coal crushing can be used in primary cyclone dust collector and secondary water bath dust collector.

Crushed materials fall into the belt conveyor, due to the high difference is easy to produce dust, need to cover the discharge chute and fall into the belt conveyor or other equipment, at the same time, the lower part of the hood air extraction for dust removal.

The dust return pipe of the dust collector must be a little far away from the air extraction hood, so that the dust will not be extracted again and circulated in the dust collector. Back to the dust pipe and the level of the inclined angle of about 5Q0, and close to the material on the belt conveyor, so that the dust slowly slides down, to prevent the impact of falling too hard and dust. Install water spraying device at the ash return discharging place, so as not to raise the dust again. If the impact crusher or hammer crusher crushing limestone, due to the rotor and hammer speed operation, in the discharge port to produce greater air pressure, dust phenomenon is serious. The way to deal with it, you can place the connecting pipe to connect the upper and lower parts of the crusher, so that part of the airflow circulates in the internal circulation, in order to reduce the pressure of the air at the discharge port.

We are a professional manufacturer of crushing and grinding equipment, welcome to click on the customer service to learn more about the price of the equipment, production cases and other detailed information, 24 hours online free consultation.