Analysis of energy consumption problems in the milling production line

Throughout the entire milling production line you will develop, equipped with the most equipment is the motor, different sizes and models, this is why? In fact, each motor is a mechanical energy supply station, connecting each transmission equipment, is the energy transfer station.

The so-called energy consumption refers to the power consumption per unit of time under normal operation and production, and the power consumption of the milling production line refers to the synthesis of all the good points of the motor, the milling equipment is driven by the motor to run, a complete set of production line needs to be equipped with six motors, respectively, connected to a deep cavity jawbreaker, bucket elevator, electromagnetic vibration feeder, analyzers, hosts, fans, and other transmission equipment, and the conversion of energy between the energy is carried out here, through the motor will be farther away, the motor will be more than the motor, the motor will be more than the motor.   The transformation of energy is carried out here, through the motor will be far from constant electrical energy into mechanical kinetic energy through the belt transmission to the running equipment. We will also see the mission manual, generally each type of equipment technical parameters are clearly marked in the table of power, which is required to be equipped with the size of the motor model, but also equipment to achieve the normal mechanical operation of the energy consumption required, the energy is transformed into a variety of forms and disappeared, for example, mechanical transmission consumption, friction, sound, and so on, disappeared in the form of this transmission device, so that the source of energy is the supply of electricity, through the motor Converted into mechanical energy.

But where does all this energy go? From the law of conservation of energy in terms of certainty will not disappear out of thin air, just difficult to see with the naked eye, just to give an example is not difficult to understand: the daily activities of human beings also need to consume a huge amount of energy, the main channels of intake is the food, a variety of food rich in energy is also different, human beings through the path of food intake to meet the daily activities of the required energy consumption, such as walking, talking and so on are all in the time and the moment Consumption of energy, not produced by themselves, the only difference is that the human body can store energy, and the mill can not, so the operation of grinding equipment, material crushing, production of sound, machine trembling, friction, etc. are the ability to go to the place, energy in the continuous operation of production slowly disappear, from a macro point of view, in fact, he has not disappeared, but just a different situation exists, as from the initial electric energy It just exists in a different situation, just like the transformation from electrical energy to visible mechanical transmission.

Although energy is conserved, but how to control is very critical, that is, the utilization of energy, generally in terms of production, in the case of completing the same work tasks, the less power consumption indicates that the better the efficiency, that is, the conversion of energy during the period of high utilization, the smaller the energy loss.

In short, the milling production line energy consumption for the enterprise is not a small start, and is a continuous cost expenditure, if the control of improper cost increases, the natural profit is less, on the contrary, it will create more profit value, OCP new mill energy efficient, quality assurance. Welcome to click on the website customer service to learn more, 24 hours online.