Where to buy a used jaw crusher for andesite 185 tph in Peru – A practical sourcing guide for quarry and mining operators
Why the question of where to buy a used jaw crusher for andesite 185 tph in Peru matters for your operation
Peru's mining and construction sectors are experiencing a remarkable upswing. Mining investment reached USD 2.63 billion in January–May 2026, up 43.6 per cent year-on-year from USD 1.83 billion in the same period of 2025. For the full year 2025, mining investment totalled USD 6.23 billion, marking its highest level in a decade, and the Ministry of Energy and Mines expects investment to approach USD 7.1 billion in 2026. This mining boom is accompanied by a surge in construction activity. The Peruvian construction industry is expected to expand by 4.2 per cent in real terms in 2026, supported by rising private investments in mining projects and public investments in transport infrastructure. The government has allocated PEN 7.7 billion (approximately USD 2.1 billion) for public infrastructure projects in 2026. For quarry operators and mining contractors working with andesite – a hard, durable volcanic rock widely used in road construction and concrete – investing in a used jaw crusher offers a cost-effective alternative to new equipment. If you are searching for where to buy a used jaw crusher for andesite 185 tph in Peru, you need a supplier who understands the local market, can verify equipment condition, and offers reliable after-sales support. At OCP Mechanical Company, with over 40 years of manufacturing expertise, we supply factory-reconditioned jaw crushers that deliver dependable performance at a fraction of the cost of new machines.
Understanding andesite and its crushing requirements for 185 TPH
Andesite is an extrusive igneous rock with a Mohs hardness of 6‑7 and a compressive strength typically ranging from 150 to 250 MPa. It is moderately abrasive and can cause significant wear on jaw crusher liners, especially when processed at high tonnages. For a 185 TPH operation, the jaw crusher must have a feed opening of approximately 36 x 48 inches to accept run-of-quarry material, which can be up to 600‑800 mm in size. When you evaluate where to buy a used jaw crusher for andesite 185 tph in Peru, it is essential to inspect the crusher's condition: the jaw plates, toggle plate, bearings, and frame are critical areas. A used jaw crusher that has been properly maintained can offer the same performance as a new unit, but at a significantly lower price. Our reconditioned jaw crushers undergo a thorough inspection, including a full teardown, crack testing on the frame, replacement of worn bearings, and installation of new jaw plates. We also provide a 12‑month warranty on all reconditioned equipment, giving you peace of mind. When you ask where to buy a used jaw crusher for andesite 185 tph in Peru, choosing a supplier that offers a comprehensive reconditioning program is crucial to ensuring long-term reliability.
Key factors to consider when buying a used jaw crusher
When you are researching where to buy a used jaw crusher for andesite 185 tph in Peru, there are several critical factors to evaluate. First, the crusher's operating hours and maintenance history provide insight into its remaining service life. We recommend requesting service records and, if possible, a third-party inspection report. Second, check the condition of the jaw plates and side liners; these are the most heavily worn components and their replacement cost should be factored into your budget. Third, inspect the bearings and the eccentric shaft for any signs of overheating or scoring. Fourth, verify the crusher's frame for cracks, especially in older units that may have been subjected to overload conditions. Fifth, consider the crusher's mobility – if you need a mobile unit, ensure the undercarriage and tracks are in good condition. Our reconditioned Type J jaw crusher is available in both stationary and mobile configurations, with all wear parts replaced and the crusher tested under load before shipment. When you decide where to buy a used jaw crusher for andesite 185 tph in Peru, we provide a comprehensive inspection report and a video of the crusher running under load, so you can assess its performance remotely.
Where to source used jaw crushers in the Peruvian market
Peru's mining and construction sectors are well-established, and there are several avenues for sourcing used equipment. These include local dealers, online marketplaces, and direct from mining companies that are upgrading their fleets. However, sourcing directly from a manufacturer like OCP Mechanical offers distinct advantages. We have a global network of used equipment sources, and we recondition each unit to our exacting standards. We also provide factory-direct pricing, which is often more competitive than local dealers who may add significant markups. Additionally, we handle all logistics, including shipping from our facility to Peru's ports (Callao, Matarani, or Paita) and customs clearance. Our team coordinates with local freight forwarders for inland delivery to your site. When you search for where to buy a used jaw crusher for andesite 185 tph in Peru, consider the value of working with a supplier who offers a complete package – equipment, reconditioning, warranty, and logistics support.
Peru's operating environment – altitude, climate, and logistics
Peru's diverse geography includes high-altitude regions in the Andes, where many mining operations are located at elevations exceeding 3,000 metres. At these altitudes, the lower air density can reduce engine performance and cooling efficiency. When you purchase a used jaw crusher, ensure that it is equipped with a high-altitude engine package or that the motor is appropriately derated. Our reconditioned Type J crushers are available with high-altitude options, including turbocharged engines and upgraded cooling systems. The climate varies from arid coastal areas to humid jungle regions; for operations near the coast, corrosion protection is important, while for jungle operations, the equipment must handle high humidity. Logistics are another key consideration; many sites are accessed via unpaved roads, and the rainy season can make transport challenging. Our logistics team has experience shipping to Peru and can advise on the best routing and timing for your equipment delivery. When you ask where to buy a used jaw crusher for andesite 185 tph in Peru, choose a supplier who understands these local conditions and can provide equipment that is fit for purpose.
Cost savings and payback period – why used makes sense
The primary advantage of buying a used jaw crusher is the significant cost savings. A used Type J jaw crusher suitable for 185 TPH typically ranges from $120,000 to $180,000, compared to $250,000‑$350,000 for a new equivalent. This price is for reference only – final quotations depend on the crusher's age, condition, and reconditioning level. The payback period for a used crusher is often 12‑18 months, compared to 24‑36 months for a new machine, making it a highly attractive option for budget-conscious operators. Additionally, used equipment is often available for immediate delivery, whereas new crushers can have lead times of 6‑12 months. Operating costs for a well-maintained used crusher are comparable to those of a new unit, especially when the wear parts have been replaced. We supply genuine replacement parts at factory prices, ensuring your operating costs remain manageable. When you are evaluating where to buy a used jaw crusher for andesite 185 tph in Peru, the financial benefits of a used unit are compelling, particularly for projects with tight budgets or near-term production goals.
Sample parameter table for reconditioned Type J jaw crusher (For reference only)
The table below provides indicative specifications for our reconditioned Type J jaw crusher, suitable for 185 TPH andesite applications. Actual values depend on feed size and site conditions; please request the latest data from our customer service, as all parameters are continuously updated.
| Parameter | Value (approximate) |
|---|---|
| Model | Type J |
| Feed opening | 36” x 48” (914 x 1,219 mm) |
| Capacity (andesite) | 180‑200 TPH |
| CSS range | 3‑8 in (75‑200 mm) |
| Motor power | 150‑200 HP (110‑150 kW) |
| Operating weight | 60,000‑70,000 lbs (27,000‑31,700 kg) |
| Reconditioning level | Full teardown, new bearings and jaw plates |
| Warranty | 12 months on mechanical components |
This table is for illustrative purposes only. For precise engineering data and process guarantees, please consult our technical team with your specific andesite sample.
After-sales support and spare parts availability in Peru
Reliable after-sales support is critical for any used equipment purchase. OCP Mechanical provides comprehensive support for customers in Peru. We maintain a regional spare parts inventory that includes jaw plates, toggle plates, bearings, and drive components, ensuring rapid delivery to your site. Our technical support team is available 24/7 via phone or video call to assist with troubleshooting and maintenance. We also offer on-site training for your operators, covering daily inspections, lubrication schedules, and jaw plate replacement. Our service engineers can travel to your site for installation supervision and commissioning. When you decide where to buy a used jaw crusher for andesite 185 tph in Peru, choose a supplier who stands behind their equipment with responsive support and a dependable parts supply chain.
Why OCP Mechanical is your trusted partner for used jaw crushers in Peru
With over 40 years of manufacturing experience, OCP Mechanical offers significant advantages. We are a factory-direct supplier with a comprehensive reconditioning program that ensures every used crusher we sell meets high-performance standards. Our Type J jaw crusher is built with heavy-duty components and is available with various options, including hydraulic adjustment, automation, and mobile chassis. Our logistics team has extensive experience shipping to Peru, and we provide all necessary documentation for customs clearance. Our after-sales support includes a 12-month warranty, remote technical assistance, and a comprehensive spare parts supply chain. We are committed to helping you achieve efficient, cost-effective andesite processing that supports your business growth in Peru.
Conclusion – Contact OCP Mechanical today to find your used jaw crusher
The booming mining and construction sectors in Peru create a strong demand for reliable crushing equipment. A used jaw crusher offers a cost-effective solution without compromising performance. OCP Mechanical provides the equipment, reconditioning expertise, and factory-direct pricing you need to make a smart investment. Our online customer service team is available 24/7 to help you find where to buy a used jaw crusher for andesite 185 tph in Peru and provide a customised quote. Click the chat button now – let us help you build a productive and profitable crushing operation in Peru.
