Vertical crusher output and its advantages

Vertical crusher is a new type of fine crushing/coarse grinding equipment developed on the basis of other fine crushing equipments with optimised design of main technical parameters, which is popular in the market due to its vertical structure design, small footprint and convenient operation.

Vertical crusher hourly output of 5-100 tonnes, there are 5 models, respectively, 800, 1000, 1250, 1500, 1750, etc., feed size ≤ 100mm, discharge size 0-10mm, suitable for a variety of medium-hard and weakly abrasive materials (coal, limestone, pebbles, etc.), according to the processing of raw materials, output requirements, site conditions, etc., to a reasonable choice, the specific vertical Vertical crusher model and output table can be clicked on customer service consulting to understand.

Vertical crusher structure:

Vertical crusher structure consists of transmission device, bearings, upper cover, liner, hammer head, hammer disc, spindle, belt, inlet, outlet, support, motor, access door, barrel, cover and base and other parts of the simple and reasonable, low operating costs, the use of the principle of stone to stone, low wear.

Vertical crusher working principle:

The material joins from the upper mouth, falls into the crushing chamber, and is struck by the high-speed rotating plate hammer, which is quickly thrown to the counterattack plate, and then bounced back to the hammer plate after impact, and is struck again. Meanwhile, the hammer head drives the material to produce a flow, which produces a great grinding effect among each other, so as to make the material further finely crushed until it breaks down to the required particle size.

Vertical crusher advantages are introduced:

1. The finished sand has even granularity, cubic shape, no fine grain, low content of needles and flakes, high quality and less impurity.

2. Impeller self-lining wear is small, coupled with the long wear cycle of roller skin, life expectancy is 2-3 times longer than the general equipment.

3. No sieve bar setting, materials with large amount of sediment and moisture will not be clogged, and the moisture content can be up to about 8%.

4. Adopting elastic adjustment mechanism, the non-crushable material can be discharged automatically, which will not cause damage to the equipment.

Vertical crusher price is usually not very high, it belongs to the small equipment, due to the choice of models are not the same, and more mining machinery manufacturers, equipment raw materials, design and production process is very different, so there is a difference in price. Welcome to click on the website customer service immediately free consultation to understand.