What are the characteristics of double-stage no screen bottom crusher

Double-stage no screen bottom crusher, also known as double-stage crusher, because it did not use the screen grate bottom in the design, can be used for crushing high wet material gangue, shale, cinder, etc., to solve the problem of crushing high wet material, there is no paste plug sieve plate phenomenon, on the double-stage no screen bottom crusher model parameters, features and other related content, the following is a detailed introduction.

How many models of double-stage bottomless crusher?

There are 7 models of double-stage non-screened bottom crusher, with an hourly output of 10-300 tonnes, the machine is equivalent to two hammer crusher into one, a reasonable combination of a whole, two sets of rotors used in series, higher efficiency, feed size ≤ 200mm, discharge size 0-3mm, can be adjusted to change the size of granularity of the gap between the crushing hammerheads, the specific parameters of the double-stage non-screened bottom crusher can be clicked on the website of the customer service! Learn more about it now.

Features of double-stage no screen bottom crusher:

1. Double rotor up and down two-stage crushing, to achieve the effect of hammer powder material, material powder material, directly discharged.

2. Electric-hydraulic manipulation, one person can easily complete the machine operation, maintenance, replacement parts, etc..

3. Uniform granularity of the output material, large crushing ratio, low over-crushing rate, low content of needles and flakes, no internal cracks.

4. It shortens the time of material staying in the crushing chamber and improves the service life of wearing parts.

5. Shift the gap technology, hammer head wear and tear without repair, move the position of repeated use, a hammer head can be used on top of three sets of hammer head. And high alloy wear-resistant hammer head, hammer head and hammer shank combined use, only change the hammer head, do not change the hammer shank.

Principle of double-stage non-screening bottom crusher:

Double-stage non-screening bottom crusher has two rotors rotating in the opposite direction and a bearing anvil located between the two rotors, crushing mainly occurs between the two rotors, when working, under the drive of the dual motor, the two sets of rotors connected with each other at the same time high-speed rotation, continuous crushing, up and down the two levels, so that the material by the upper level of the rotor crushed by the rotor that is the speed of rotation of the next level of the rotor hammerhead again fine crushing, the cavity of the material collision with each other at high speed, and each other, crushing, to meet the different fields of use. Crushing, to meet the requirements of different areas of use.

For the double-stage bottomless crusher price is not high, but presents a differentiation, due to the actual production, specific processing needs are different, the choice of models are not the same, there will be some differences, in addition, the market manufacturers, brand miscellaneous, there is a high and low. ocp manufacturers is the source of factory goods, equipment from the raw materials on the strict selection and control, the establishment of a quality control system and factory quality standards, you can go to the factory site visits, the specific double-stage bottomless crusher is not high, but the price is not high. Specific double-stage bottomless crusher price, you can directly click on the consultation to understand, enjoy multiple benefits, website customer service 24 hours online.