Reasons for slowing down the crushing process of vertical composite crusher

Compound crusher, mainly used for secondary or tertiary crushing in mineral processing, coal, building materials, chemical industry, refractory materials, metallurgy, cement, glass, ceramics, electric power and other industries. If you find that the equipment crushes materials slowly, please contact the after-sales personnel in time to deal with it. Then what are the reasons that cause the slow crushing process?

The clogging of the compound crusher may be caused by the feeding speed is too fast. When the feeding speed is too fast, the load of composite crusher will be increased, which will lead to unloading or clogging due to untimely processing. In this case, we should always pay attention to the feeding speed of the compound crusher and the indication of the ammeter.

Secondly, the indication value of ammeter of composite crusher is larger when the feeding volume is larger. When the rated current exceeds the equipment, it will lead to overload operation. In this case, the working time is too long which will cause the motor of the equipment to be blocked or even burned. When this happens, on the one hand, the amount of feed should be reduced immediately and the feed equipment should be adjusted. Therefore, when choosing equipment, it is necessary to choose the right equipment to ensure that the compound crusher can ensure safe and effective work in the production process.

Thirdly, after the compound crusher works for a period of time, problems such as aging, crushing, engaging and corresponding attachments crushing may occur, or when the crushed material of the compound crusher has a large water content, it will discharge the equipment may be slowed down or even blocked problems. In this case, the equipment should be regularly inspected, maintained and the relevant parts of the composite crusher should be replaced in time. Ensure that the equipment is safe, stable and efficient operation. Usually, the water content of the crusher of compound crusher should be controlled below 14%. After working for a period of time, the equipment should be maintained and repaired in time.

Fourthly, the problem of slow discharge or blockage of compound crusher is fan blockage, which may be caused by incompatible conveying equipment. When the problem is found, the fan should be cleaned first, and then the corresponding conveying equipment should be replaced in time.

We are a professional manufacturer of crushing and grinding equipment, welcome to click on customer service to learn more about the price of equipment, production cases and other detailed information, 24 hours online free consultation.