Common problems and solutions in the use of marble sand making machine

Marble is an important building materials and industrial materials, natural marble can not be used directly, you can first use our OCP machinery company produced sand making machine and other equipment for finishing, more commonly used "shaping" tool is marble sand making machine. Here to remind you of some of the problems that may arise in the use of sand making machine.

1. Marble sand making machine amplitude is too large

Marble sand making machine should be relatively stable during operation, despite the relatively large impact of marble materials on the equipment, but the current production of marble sand making machine has been able to cope with the strong impact of materials. The marble sand making machine will lead to an increase in the amplitude of the equipment due to long-term wear and tear, overfeeding or the presence of high hardness foreign materials in the feed. At this time, it is necessary to timely replace the wearing parts, reduce the feed size, strictly control the feed to ensure that there is no high hardness foreign matter in the feeding process.

2. Finished sand discharge particle size is large

The main reason why the grain size of the finished sand processed by the marble sand making machine is too coarse is the loosening of the triangle belt. At this time, the triangle belt should be tightened in time; the wear and tear of the marble internal screen sand making machine will also lead to the marble finished product granularity is too large, at this time, the screen should be replaced in a timely manner, and attention should be paid to checking the wear and tear of the screen before each operation.

3. Bearing overheating

Marble sand making machine in operation may appear bearing overheating phenomenon, the main reason is lubrication, see whether the lubrication is good, check whether there are impurities in the bearings, such as timely cleaning of bearings. Long-term wear can also lead to bearing overheating. If the bearing is found to be worn, it should be repaired in time. If the wear is serious, it should be replaced in time.

We are a professional manufacturer of crushing and grinding equipment, welcome to click on customer service to learn more about the price of equipment, production cases and other detailed information, 24 hours online free consultation.