Purchase a sand screw washer for artificial sand 48 tph in Indonesia
For manufactured sand producers in Indonesia – from Java and Sumatra to Kalimantan and Sulawesi – a 48 tph sand screw washer is an essential upgrade to remove excess fines from VSI‑produced sand. Artificial sand often contains 15‑25% fines (below 0.075 mm), which must be reduced to 5‑10% to meet concrete specifications (SNI 03-1970-1990). A sand screw washer scrubs the sand and allows fine impurities to overflow, producing a clean, dewatered product for ready‑mix, precast, and block making. When you purchase a sand screw washer for artificial sand 48 tph in Indonesia, you invest in a machine that adds significant value to your product. OCP Mechanical Company, a factory‑direct manufacturer with over 40 years of experience, supplies Type W‑48 sand screw washers with polyurethane wear parts and water recycling options, backed by local support in Jakarta and 24/7 online assistance.
Note: Product data are constantly updated; the latest specifications should be confirmed with our online customer service.
Why a sand screw washer is a practical choice for Indonesian artificial sand
Artificial sand from andesite, basalt, or river pebble is sharp and abrasive. A sand screw washer uses a single‑shaft screw (1,000‑1,200 mm diameter, 6‑8 m trough) to gently agitate and lift sand while fines overflow. Polyurethane wear shoes are standard – they last 3‑5 times longer than steel shoes and prevent iron contamination. Many Indonesian sand plants have adopted the Type W-48, reporting fines reduced from 18% to 6‑8% and product moisture below 15%. The adjustable weir allows precise control of the cut size, ensuring you retain valuable fine sand while discarding only the ultrafines.
Key features that lower your cost per ton of artificial sand
When you purchase a sand screw washer for artificial sand 48 tph in Indonesia, focus on features that directly reduce operating expenses:
Polyurethane wear shoes – Resist abrasion from sharp volcanic particles and last much longer than steel.
Adjustable weir – Allows fine‑tuning of the overflow cut size (typically 0.075‑0.5 mm) to balance fines removal against sand recovery.
Heavy‑duty gearbox (22‑30 kW) – Sealed bearings prevent contamination from fine sand dust.
Variable frequency drive (VFD) – Adjust screw speed from 15‑25 rpm; slower speed reduces wear, higher speed increases throughput.
Water recycling system (optional) – A settling pond or thickener can reuse 80‑90% of process water – a valuable advantage in water‑sensitive regions.
Dewatering screen (optional) – Reduces product moisture to 12‑15% for direct stockpiling.
All price information in this article is for reference only; contact our team for a current, site‑specific quote.
Compared to other suppliers, OCP’s factory‑direct model saves 15‑20% on both the washer and genuine wear parts, with predictable annual maintenance costs.
Price range and delivery to Indonesia
When you purchase a sand screw washer for artificial sand 48 tph in Indonesia, the ex‑works price for a Type W-48 screw washer ranges from $14,000 to $24,000 USD. A VFD adds $2,000‑$4,000. A dewatering screen (1,200 x 3,600 mm) adds $8,000‑$12,000. Shipping to Jakarta or Surabaya (CIF) adds $3,000‑$6,000. A starter set of polyurethane shoes, bearings, and V‑belts adds $800‑$1,500. Total landed cost is approximately $18,000‑$40,000 USD.
Many Indonesian sand producers have recovered the washer investment within 6‑12 months by selling washed sand at a premium over unwashed material.
How to purchase and get fast delivery in Indonesia
To purchase a sand screw washer for artificial sand 48 tph in Indonesia, simply click the live chat icon on this page. Provide your feed sand type (manufactured from VSI), target fines content, and site location. Within 2‑4 hours you will receive a detailed quotation including ex‑works price, shipping to your port, lead time (20‑25 days), and a starter wear parts kit. Actual washing efficiency depends on feed gradation and solids concentration; for a site‑specific recommendation, consult our engineers.
OCP keeps common wear shoes, gearbox parts, and screen panels in our Jakarta warehouse for fast after‑sales delivery across Indonesia. We also offer remote commissioning and operator training via video call, ensuring your washer reaches target performance quickly.
Operational tips for artificial sand washing in Indonesia
Indonesia’s tropical climate means sand can be moist. Adjust the weir height so that only fines overflow; if the product sand is too wet, increase screw speed slightly. Inspect polyurethane shoes every 200 hours; replace when thickness is reduced by 50%. Clean the water injection nozzles weekly to prevent clogging with fines. For sites with limited water supply, the optional water recycling tank is highly recommended. Test product fines content every shift using a simple sieve and adjust water flow accordingly. Keep a spare set of polyurethane shoes and bearings on site.
Why OCP is your trusted supplier for artificial sand screw washers in Indonesia
Choosing to purchase a sand screw washer for artificial sand 48 tph in Indonesia is a smart investment – you need a partner who backs you with local stock and technical advice. OCP Mechanical Company has four decades of experience in sand processing equipment for Southeast Asia. Our 24/7 online team helps with weir adjustment, speed tuning, and troubleshooting. We invite you to request a no‑obligation quote and experience factory‑direct pricing.
For a no‑obligation purchase a sand screw washer for artificial sand 48 tph in Indonesia, simply click the live chat icon on this page. Our online customer service team is available 24 hours a day, 7 days a week, to provide free price quotes, equipment recommendations, and installation advice – helping you produce specification sand more efficiently and profitably.
