Minimize the failure rate of cone crusher

Cone crusher as a commonly used in the production of a crushing equipment, has a very high production efficiency. Its large crushing ratio and excellent performance make people impressed by it, but how to use it in order to reduce the failure rate of cone crusher?

During operation, the material to be crushed in the cone crusher is generally placed in the middle of the dividing plate, so that it gradually falls into the crushing chamber, rather than all directly into the crushing chamber. Because of this, the material can be crushed more fully, reduce the wear of the crusher liner, and extend the service life of the cone crusher. Although its principle is very advanced, but, in the operation, still need to pay more attention to make it can better performance. Here's a look at what the experts say about the correct operation steps of the cone crusher. Experts reveal: only the correct operation can reduce the failure rate and ensure the normal operation of the cone crusher.

Experts: First of all, when feeding the cone crusher, the material should be evenly put into the crushing cavity with the cone crusher's dividing plate, but keep in mind the amount of material to be fed each time, generally lower than the height of the rolling molar wall; the size of the material to be fed must be guaranteed to be accurate, not too big or too small, otherwise it is very easy to cause damage to the cone crusher and affect the production output.

Of course, when the crusher is running, it must ensure that its operating load, within the specified range, if it exceeds this reasonable load, not only will not bring an increase in production, but also may cause safety production accidents, which is not worth the loss. So you can't take risks. When the material is crushed, the operator must first stop feeding the material and crush the remaining material inside the crushing chamber completely before cutting off the power and stopping the operation. This not only ensures safe production, but also will save resources and do a very reasonable job.

Many users will ignore the maintenance of crushing equipment in the shutdown, thinking that it is not working, so maintenance is superfluous. This idea is very wrong, when the cone crusher is not running, it also needs regular maintenance on a regular basis, timely inspection of parts, add lubricant, so as to ensure that the next time can be normal operation. 

If you are interested in our cone crusher, please contact us, 24 hours online free consultation.