Mineral processing crusher equipment to remove rust regularly

Mining machinery is for the mining, crushing, separation and machinery and equipment. In the mining crushing and screening link, it will use crusher equipment, including jaw breakers, cone breakers are used more. After the mining machinery also extends to the field of building materials, but the use of more diverse crushing equipment. Jaw crusher, impact crusher, impact sand making machine, hydraulic cone crusher, single cylinder hydraulic cone break can be applied to sand and gravel production. These devices are still classified within the machinery industry to the mining machinery mineral processing equipment classification.

With so much mineral processing crusher equipment, the annual rust loss is a tremendous number. Rust is a fluffy state that will continue to occur and will occur quickly in hot and humid environments, also reducing the strength of the steel. Effective rust removal and rust prevention not only saves more resources, but also provides help for production safety. The following are several methods of rust removal and rust prevention:

1. Chemical rust removal method: It is mainly a rust removal method that uses acid to react chemically with metal oxides to get rid of the rust products on the metal surface of the high-efficiency sand making machine, which is usually called pickling rust removal, and this rust removal can only be operated in the workshop;

2. High-pressure water abrasive rust removal: using the impact effect of high-pressure water jets and water sledging to remove the rust and coating on the steel plate of the sand making machine. It is characterized by no dust pollution, no damage to the steel plate, greatly improved rust removal efficiency, up to 15m2/h or more, and good rust removal quality. However, the steel plate after rust removal is easy to return to rust and must be painted with special wet rust removal coating, which has a greater impact on the painting of general performance coatings;

3. small wind or electric descaling: mainly powered by electricity or compressed air, fitted with appropriate descaling devices for reciprocating or rotating movements to suit the descaling requirements of various occasions;

4. Applying anti-oxidation paint: applying mineral oil, paint or firing enamel, spraying plastic, etc. on the surface of iron products. Plating the surface of iron and steel with a layer of rust-resistant metals such as zinc, tin, chromium, nickel, etc. by electroplating and hot plating. All these metals form a dense oxide film on the surface, thus preventing rusting of iron products in contact with water, air and other substances. Chemical methods can also be used to generate a dense and stable oxide film on the surface of iron products to prevent them from rusting.

Mining production line equipment is usually open air, wind and sun, rain and frost, over time, the crusher equipment on the anti-rust paint is to fall, it will cause the different degrees of rust, internal if you adhere to the production, rust will automatically remove. Want to control the rust, you need to do a little cleaning of the equipment every year, coated with anti-rust paint. In addition, you can also build an airtight concrete civil construction and put the equipment inside to avoid the generation of dust, or build a tower type stone production line, which occupies a small area and can do rain protection at any time to reduce the amount of rust and corrosion.

If you plan to invest in crushing and grinding production line, or need any crusher, sand making machine, grinding mill and other related equipment, welcome to visit our production base, you can also directly consult our website customer service, 24 hours online, to provide free consulting services!