Life everywhere stone powder should choose what kind of grinding equipment processing

Stone powder is the powder of the stone, the nature of the stone variety, and thus the stone powder is also a variety of stone powder according to different properties can be used in all walks of life and even daily life, such as calcium tablets, cosmetics, toothpaste, clothes, etc., so the stone powder application in life everywhere, then what kind of stone powder processing milling equipment should be used?

There are many kinds of stone mill, according to different applications of stone powder, physical property differences, and the requirements of the quality of the powder are tight and loose, choose and buy processing machine models are also different, usually choose and buy grinding machine users are quite a lot, one is because of this machine from a long time ago, the technology is mature, processing capacity is strong, and the second is the price is preferential than the other grinding equipment to be a lot of concessions, the fineness of the stone powder to be in the 30-425 mesh between the all Can be selected. If the fineness requirements are high, the output is large, the thunder mill processing up slightly strenuous, this time to buy high-pressure mill is the most appropriate, high-pressure suspension mill is improved on the basis of the original thunder mill, the unique high-pressure spring device is the same type of machine output increased by more than one-fifth, but also improve the fineness, the finest up to 1,000 mesh, the finished product fineness of the user according to the needs of the user and the technical parameters of the equipment adjusted by themselves. The fineness of the finished product can be adjusted by users according to the demand and technical parameters of the equipment. In addition to the above two stone mill, just put into the market in recent years, the European version of the mill can be said to be the first of many machines, special arc air ducts, non-resistance to the wind inlet worm shell, bevel gear drive and internal thin oil automatic lubrication system, and the shovel knife is a change in the usual planar structure, wear and tear without the need for the whole of a single shovel knife can be replaced, the European version of the Raymond mill many advantages not only a large increase in yield, high efficiency, and strong automation performance, can be For the user to save a lot of human resources.

Raymond mill, high pressure mill, European version of the mill is now commonly used in the powder manufacturing industry to focus on mining machines, in addition to ball mills, strong pressure trapezium mill, micro powder mill, ultrafine mill and other milling equipment, can be used for stone powder processing, but in the selection of the type also need to be purchased according to their own actual needs, low yield, powder requirements are not strict can be selected for the mine mill, the output of the high yield can be selected for the high mill, the large-scale powder processing plant is recommended to choose the European mill. If the original ore belongs to the metal minerals can choose ball mill, fineness requirements are very strict selection of micro powder mill or ultrafine mill.

OCP suggests that you invest in equipment must be clear between the nature of processing stone characteristics, daily production plan how much and the activities of the capital situation, and then comprehensively consider the choice of what kind of stone mill is the most appropriate, if there is unclear or do not understand the place, you can always click on the website customer service, there will be professionals to provide technical support, 24-hour free consultation.