Crusher equipment needs to be cleaned in time

Crusher equipment has made a lot of contributions to our economic construction and industry development. Crusher manufacturers remind everyone that if you want to keep the crusher equipment in good operation, you need to do a good job of cleaning. How to implement it?

During the crushing process, due to the large particle size of the material or the fast feeding speed, it is easy to cause the jamming of the crusher equipment, which directly affects the normal operation of the machine. Or too much ore enters the crushing cavity, causing the crusher to be stuffy; the ore discharge conveyor stops to make the discharged material accumulate and block the crusher, causing the crusher to choke on iron. At this time, we need an emergency stop to clean the crushing chamber thoroughly.

Sometimes the iron block stuck between the wall of the crusher, the rolling wall and the wall of the rolling socket is too large, causing the crusher to be stuck. If choking on iron is the main reason for the stuffiness of the crusher, then the most dangerous thing for the operator of the crusher is to remove the iron blocks stuck in the crusher cavity. Using incorrect methods may cause serious injury or death. To do a good job of cleaning the crusher equipment, it is necessary to start from the daily work. Check before use and clean up the residual materials after use. Do not let the residual materials accumulate in the crushing cavity, especially in winter. If the weather is cold, it will freeze if it is not cleaned in time. Affect the next use. Therefore, during the use of machinery such as crushers, it is necessary to clean the equipment in time to keep it in the best working condition.