Buy a used sand screw washer for silica sand 50 tph in Cambodia

For silica sand producers in Cambodia – from the processing hubs in Kampot and Takeo to the growing industrial zones around Phnom Penh – a used sand screw washer offers a capital‑smart way to upgrade product purity without the full cost of new equipment. A well‑maintained used screw washer can remove clay, silt, and fine impurities from silica sand, delivering a cleaner product for glass, ceramics, or construction applications at 40‑60% less than new. Knowing how to buy a used sand screw washer for silica sand 50 tph in Cambodia helps you source a reliable, factory‑reconditioned machine with local support.

Note: Product data are constantly updated; for current inventory of used sand screw washers, please contact our online customer service.

Why a used sand screw washer is a practical choice for Cambodian silica sand

Silica sand often contains clay, iron stains, and fine silt that must be removed to achieve the purity required for glass or industrial applications. A sand screw washer uses a single‑shaft screw (1,000‑1,200 mm diameter) to gently scrub and lift sand while impurities overflow. Polyurethane wear shoes prevent metal‑to‑sand contact, preserving silica purity. A used washer, when reconditioned with new wear shoes, bearings, and seals, can deliver the same washing efficiency as a new unit – many Cambodian processors have successfully used reconditioned screw washers, reducing capital outlay and achieving consistent product quality--1.

What to check when buying a used sand screw washer

To confidently buy a used sand screw washer for silica sand 50 tph in Cambodia, inspect or request a report on these key components:

• Screw shaft and flights – Check for straightness and wear. Worn flights reduce lifting capacity.

• Wear shoes – Polyurethane shoes should be intact; replace if cracked or worn beyond 50%. OCP installs new polyurethane shoes as part of reconditioning.

• Gearbox – Listen for unusual noise or oil leaks. OCP serviced gearboxes are included.

• Trough liners – Inspect for holes or excessive wear; replace if needed.

• Bearings and seals – Worn bearings cause shaft misalignment. OCP replaces bearings as part of reconditioning.

• Water injection nozzles – Ensure they are not clogged; replace with stainless steel for corrosion resistance.

OCP’s used washers are disassembled, inspected, and rebuilt with new polyurethane wear shoes, bearings, seals, and gearbox oil. We provide a 6‑month warranty on the shaft and gearbox--10.

All price information in this article is for reference only; contact our team for a current, site‑specific quote.

A reconditioned used sand screw washer for 50 tph ex‑works typically ranges from $10,000 to $20,000 USD – compared to $22,000‑$38,000 for a new unit-. Shipping to Cambodian ports (Sihanoukville, Phnom Penh) adds $3,000‑$6,000. A starter set of polyurethane shoes, bearings, and V‑belts adds $800‑$1,500. Total landed cost is approximately $14,000‑$28,000 USD, saving you 40‑60% over new.

How to buy a used sand screw washer in Cambodia

To buy a used sand screw washer for silica sand 50 tph in Cambodia, simply click the live chat icon on this page. Provide your feed sand characteristics (clay percentage, target purity), and site location. Within 2‑4 hours you will receive a list of available units with hours, reconditioning work done, and price. You can request a video inspection of the washer running under load. After selection, we arrange shipping and provide remote installation guidance. Actual washing efficiency depends on feed characteristics; for a site‑specific recommendation, consult our engineers.

OCP keeps common wear shoes and spare parts in our regional warehouse for fast delivery to Cambodia-45. We also offer a rent‑to‑own option for qualified buyers.

Why OCP is your trusted source for used sand screw washers in Cambodia

Choosing to buy a used sand screw washer for silica sand 50 tph in Cambodia is a smart financial decision – but you need a supplier who delivers quality reconditioned equipment and after‑sales support. OCP Mechanical Company has four decades of experience in sand processing equipment for the Asian market. Our 24/7 online team helps with weir adjustment, speed tuning, and troubleshooting-1. We invite you to request a no‑obligation quote and factory‑direct reconditioned equipment.

For a no‑obligation buy a used sand screw washer for silica sand 50 tph in Cambodia, simply click the live chat icon on this page. Our online customer service team is available 24 hours a day, 7 days a week, to provide free price quotes, equipment recommendations, and installation advice – helping you produce high‑purity silica sand with lower capital investment.