Advantages of double-stage crusher for brick factory

Brick factory, we all know very well, mainly with gangue, cinder as additives, internal fuel, and this double-stage crusher to solve the gangue, shale production of standard bricks, hollow bricks high moisture material crushing problems, by everyone's favourite and recognition, except for the advantages of double-stage crusher for brick factory there are a lot more, how much is a specific one?

Brick plant double-stage crusher, also known as the brick plant special crusher, after a long investigation, the development and production of a new type of raw material crusher, equivalent to two hammer breakers into one, a reasonable combination of a whole, two sets of rotors used in series, the interior is mainly composed of silo, conveyor, high-speed dispersing hammers, motors, brackets and other parts of the composition, but also can be used for calcite, limestone, slag and other materials.

1. Double material inner chamber:

Two sets of rotors in series with each other, so that no material crushed by the hammer head of the upper rotor is immediately finely crushed again by the hammer head of the lower rotor rotating at high speed, and the materials in the inner cavity are reversed to collide with each other at high speed and crushed each other to achieve the effect of hammer powder and material powder, which can be discharged directly.

2. No screen grate bottom:

The machine is designed without screen grate bottom, there is no strict requirements for the moisture content of the material, there is no paste plug sieve problem, there is no fine powder can not be discharged in a timely manner, repeat the problem of crushing, so the crushing efficiency is high, there is no ineffective wear and tear phenomenon of the hammer head.

3. Two-way gap adjustment technology:

Hammer head wear and liner board gap between the size of coarse, can be moved from the centre outward hammer head position to narrow the gap between the liner board to continue to use, but also from the outside to the inside of the liner board to adjust the gap, to control the particle size of the material.

4. Device counterweight balance wheel:

Up and down two sets of rotor shaft end are equipped with flywheel, flywheel can adjust the operation of the cyclical speed fluctuations, so that it runs evenly and smoothly, increase the rotational inertia, to overcome the resistance to movement, power savings of more than 20%.

5. Centralised lubrication system:

Lubrication system, a change in the grease nipple, oil cup of the traditional way of filling lubricant, the configuration of the centralised oil distribution pump, one-step operation, multi-channel oil supply, due to the full oil circuit closed, but also to prevent dust intrusion damage to the bearings.

6. Hydraulic manual start housing:

Hydraulic opening and closing device, only one person can easily open and close the shell, not only light and fast and safe and reliable, easy to maintain.

Brick plant double-stage crusher is suitable for feed size less than or equal to 200mm, finished product size less than or equal to 3mm (of which less than 2mm accounted for more than 90%), at present there are a total of 7 models, the hourly output of 10-300 tonnes, there is a lot of space for choice, the specific brick plant double-stage crusher model parameter table and price and other detailed information, you can click on the website customer service immediately free of charge consulting, 24 hours online.