What to do if the negative pressure of the milling production line is low and can not work properly

Understanding of industrial milling machine people know that the reason why the milling production line can realize the material pipeline delivery is entirely by sealing the negative pressure in the pipeline to achieve, if the pressure in the pipeline is unstable or not up to the ideal state will affect the process of the entire production process. Low negative pressure in the milling process also occurs from time to time, it does not belong to the serious equipment quality problems, most of them are caused by improper operation, so when a similar situation to first figure out the cause of the problem, and then prescribe the right medicine to ensure that the milling production is normal and orderly.

Mill production line negative pressure is too low reason analysis

The formation of negative pressure has two necessary conditions: one is enough pressure pressure, and the second is the sealed environment, it is not difficult to deduce the causes of negative pressure failure problems.

1. Insufficient air volume, the fan is to provide sufficient air volume, control the size of the pressure pressure in the pipeline of the only equipment, negative pressure is low, the first thing to think about is not caused by the fan air volume is insufficient, if it is only need to adjust the fan air volume size.

2. Control the size of the air volume in addition to the fan itself, but also by another component of the constraints - the damper, damper valve adjustment is too small to affect the air volume into the pipeline will also cause low negative pressure.

3. Seal the pipeline valve closure status, in order to facilitate the observation and maintenance, in the transmission pipeline in many places there will be a lot of valves, observation doors, and these are to ensure that the pipeline sealing the key to smooth, any one of the valves is not in normal condition will affect the number of negative pressure value in the pipeline.

4. Pipeline sealing in all types of valves are normal, sometimes also leakage, this is an abnormal state, mostly due to excessive wear and tear of the pipe or connection leakage caused by the need for timely repair intact.

5. In addition to the equipment itself on the negative pressure, the material will also affect the negative pressure in the milling production line state, such as grinding material humidity is too large, easy to cause pipeline clogging in the delivery, the wind can not be normal delivery, also belongs to the negative pressure is too low can not work properly.

It can be seen that the results of normal work is the same, can not work properly for different reasons, but no matter which reason for the milling production losses can be imagined, in the face of the milling production line negative pressure is too low can not work properly, no need to panic, carefully check the reasons for the failure of various components, and then in accordance with the provisions of the steps of the normal shutdown, can be solved by the correct treatment, negative pressure is low in the production of a number of customers on-site will occur, such problems are mostly caused by the negative pressure is too low. Low negative pressure occurs in the production site of many customers, such problems are mostly caused by technical problems, only need technical guidance on-site adjustment on the line, unlike the grinding mill bearings holding, grinding rollers and grinding ring wear and other faults both need parts cost investment, but also consume power and time.

OCP wins the market with quality, and is characterized by service beyond customer expectations, allowing customers to put into production quickly, fast return, and worry-free after-sales service. It is widely recognized in more than 130 countries and regions in Asia, Africa, Latin America and Oceania. Quality assurance comes from attentiveness and details, and advantageous service comes from professionalism and dedication. Thank you for your attention and inquiry, and look forward to our long-term cooperation. Click on customer service to get a free consultation now, 24 hours online.