What crusher is good for cement block crushing

What crusher is good for cement block crushing? In the construction and demolition industry, the processing of cement blocks is an important part. Choosing the right crusher can not only improve the production efficiency, but also ensure that the quality of the crushed material meets the requirements for reuse. In this article, we will introduce several kinds of crushers suitable for cement block crushing in detail and analyse their features and applicable scenarios to help enterprises make a wise decision when choosing.

Commonly used cement block crusher equipment advantages and disadvantages of the list

A. Jaw Crusher

1.Working Principle

Jaw crusher crushes materials through the squeezing action between two jaw plates (fixed jaw plate and movable jaw plate). The movable jaw plate makes cyclic reciprocating movement under the action of eccentric shaft, so that the material is crushed by extrusion, splitting and bending.

Advantages

Simple structure: the structure of jaw crusher is relatively simple and easy to maintain.

Wide range of application: it is suitable for materials of various hardness, including cement blocks.

High output: the hourly processing capacity of a single machine can reach hundreds of tonnes, suitable for large-scale production.

High reliability: stable operation, low failure rate and long service life.

3、Disadvantages

Limited particle size control: Jaw crusher is usually used for primary crushing, and the finished product size is relatively coarse.

Noisy: due to its working principle, jaw crusher will produce large noise during operation.

4、Applicable Scenarios

It is suitable for occasions where large amount of cement blocks need to be processed, such as construction waste treatment plant, large-scale demolition projects, etc.

B.Impact Crusher

1、Operating Principle

The impact crusher crushes materials through the impact between the plate hammer and the impact plate on the high-speed rotor. The material is gradually crushed to the required size after repeated impacts and counterattacks.

Advantages

Good fine crushing effect: the finished product of the impact crusher has uniform particle size and regular shape, which is suitable for the preparation of high-quality recycled aggregates.

Moderate energy consumption: Although the energy consumption is slightly higher than that of jaw crusher, the quality of the finished product is better, and the overall economic benefits are better.

Convenient adjustment: the position of the impact plate can be adjusted to control the size of the finished product.

3、Disadvantages

Faster wear and tear: the wear and tear of the plate hammer and impact plate are faster, and need to be replaced regularly.

Higher cost: the initial investment and maintenance cost is relatively high.

4、Applicable scenes

It is suitable for occasions with high requirements on finished product size, such as recycled aggregate production line and concrete mixing plant.

C.Hammer Crusher

1、Operating Principle

Hammer crusher achieves one-time crushing by directly hitting the material with the high-speed rotating hammer head. The material is crushed into small pieces under the impact of the hammer head, and then discharged through the screen.

2、Advantages

One time moulding: Hammer crusher can complete the crushing process in one time, simplifying the process flow.

Small footprint: the equipment has a compact structure and small footprint, especially suitable for enterprises with limited space.

Easy to operate: the equipment is simple to operate and easy to maintain.

3、Disadvantages

Limited scope of application: mainly suitable for materials with low hardness, less effective for cement blocks with high hardness.

Faster wear: the hammer head wears faster and needs to be replaced regularly.

4、Applicable Scene

Suitable for small projects or temporary works, such as small demolition works, on-site construction and so on.

D.Roll Crusher

1、Operating Principle

The roller crusher achieves material crushing by two high strength wear-resistant rollers rotating in the opposite direction. By adjusting the distance between the rollers, the granularity of the finished product can be precisely controlled.

2、Advantages

Precise particle size control: the finished product of the roller crusher has uniform particle size, which can meet different process requirements.

Low noise: low noise during operation, which is conducive to improving the working environment.

Energy saving and high efficiency: compared with other crushing equipment, the roll crusher consumes less energy under the same processing capacity, which helps enterprises save energy costs.

3、Disadvantages

Limited processing capacity: the processing capacity of roll crusher is relatively small, not suitable for large-scale production.

Limited scope of application: mainly used for crushing materials below medium hardness.

4、Applicable Scene

Applicable to the occasions that require precise control of particle size, such as laboratories, small-scale production lines, etc.

The four types of crushers mentioned above can be used for cement block crushing and processing, each of these equipment has its own characteristics and applicable scenarios, choosing the right crusher is the best!

OCP machine focuses on the production of mining equipment for 40 years, experienced, mature technology, according to your actual needs for its selection of a more suitable cement block crusher equipment, to achieve the enterprise low investment, high yield operations. More about cement block crusher price, output, motor power and other details to understand, please feel free to click to consult our online customer service, a professional product manager real-time online for you to answer.