What are the requirements for the location of sand and gravel plant

Many customers in the investment gravel plant, gravel plant site selection there are doubts, whether to choose a cheaper production site or choose a closer to the raw material production site? And so on this kind of problem gravel plant location is not only related to the operation of the production line, but also related to the profit of the production line, then what are the requirements for gravel plant location?

1. Close to the material plant: the site should usually be located near the material field, when feeding more material, it should be located near the main material field, the use of the environment needs to avoid blasting hazardous areas, the distance should be in line with the relevant provisions; gravel loss rate is high, the transportation distance is close to the site when the site permits, the site can be located in the vicinity of the concrete production system, and share the finished product yard with the concrete production system.

2. Can also choose the concrete production site: when the material is scattered, yard or concrete production system near the start of no conditions, but also in the yard and the concrete production system to choose between the use of the environment.

3. Built with the terrain: The terrain of the site should be adapted to the sandstone production line process, so that the crushed material can be self-flowing or semi-self-flowing.

4. Above flood level: For large-scale medium gravel solution plants, the site should be located above the 20-year flood level during the year.

5. The place shall have bearing capacity: the place shall have been far away from big faults and landslides, and the foundation of important workshops and facilities is stable, and there will be the bearing capacity.

6. There must be transportation lines near the place: the place should be close to the existing transportation lines, water sources and major transmission lines.

7. Far away from residential areas: the place should be as far away as possible from towns and residential areas, set up factories in towns or residential areas nearby, should be placed on the downwind side of the dominant wind direction, and to the protection distance.

8. Reduce pollution: there are waste materials piled up, when occupying arable land, should think about in the restoration of arable land to restore land to maintain part of the topsoil.

Welcome to click on the website customer service consulting, 24 hours online.