What are the aluminum ore processing equipment

Aluminum ore is mainly monohydrate hard alumina, monohydrate soft alumina and alumina trihydrate, are aluminum refining ore, often seen in major industrial fields, such as aviation, automotive, electrical appliances, chemical, metallurgy, cement, etc., usually need to be processed before use to meet the requirements of the particle size, so what are the aluminum ore processing equipment?

Aluminum ore belongs to the rhombohedral crystal system or monoclinic crystal system, the crystal structure is similar to magnesite, is a typical layered structure, white or light gray, light green, light red hue due to impurities, hardness of 2.5-3.5, the relative density of 2.30-2.43, there are a lot of processing equipment for aluminum ore on the market, but according to the material, it is recommended that we use the jaw crusher and cone crusher, the use of the effect is better.

1.Jaw Crusher

Jaw crusher is generally used in aluminum ore processing process for head crushing and rough crushing, it adopts extrusion crushing principle, deep ∨-type crushing chamber, through the movable jaw and the static jaw two jaw plates form the crushing chamber, simulating the movement of the two jaws of the animal to complete the operation, the ratio of crushing is bigger, and there is no clogging of material, there is a wedge to adjust the discharge opening, which reduces the labor intensity of the workers and downtime, and the finished product is even in size, which helps in the second stage of the crushing process, and the integrated structure of the motor and the main machine makes the installation easy. At the same time, the integrated structure of motor and main machine makes the installation easy and saves the occupied space.

2. Cone Crusher

Used in the second crushing process, through the laminar crushing cavity and fixed-axis structure design, the hydraulic motor adjusts the discharge opening to adjust the operation convenience, high crushing force, high efficiency, low energy consumption, and the design of large eccentric distance and high pendulum frequency can make the equipment to run at a lower speed, and can change the gradation of the product in order to produce fewer fines, the parts can be dismantled and installed from the upper part and the side, hydraulic lubrication combined oil station, small volume, simple wiring, no filling of the rolling mortar wall, and no need to fill in the mortar wall. The rolling mortar wall does not need packing and is quick and easy to replace.

Our company has been committed to providing customers with a complete set of powder processing solutions, is committed to creating value for customers, we have professional and technical personnel for your one-on-one customized program, in accordance with the production budget, site conditions, one-on-one design of the finished product requirements, you can submit the output requirements, fineness requirements, etc. to online customer service, we will have professional and technical personnel to give you to do the selection of the program and offer budget for your reference.