There are several choices of milling production line with a daily output of one hundred tons
There are several milling production line can achieve a daily output of one hundred tons of requirements, production is the use of the user is concerned about the important issue of customer requirements is to meet the quality of the finished product at the same time as much as possible to improve the output of one hundred tons per day in the milling production belongs to the general level of most of the powdering equipment output can reach one hundred tons of the requirements, with the exception of the ultrafine class of powder processing. Below we take the hourly output of 100 tons as an example to introduce several common grinding configuration.
Daily output of 100 tons is a very clear value, but only based on this can not be used as the key to selecting the mill, one is the fineness of the finished stone powder does not indicate that the same kind of mill with the same kind of material 100 mesh and 400 mesh production is very different; Secondly, the daily output can only represent the day's productivity, and the daily working time is not clearly stated, imagine that the daily work of 5 hours and 10 hours is certainly not the same, and the daily work of 10 hours is not the same. Third, the type of grinding material, nature in the many types of ores, stone nature of the difference between the increase in hardness is also different sizes, and the harder the stone Thunder Mill material output is lower. Due to the above many unqualified factors, but according to the daily output of one hundred tons of configuration grinding production line is not accurate enough, in order to more rigorous study of grinding equipment selection method, we come to its qualitative, and then do the analysis of equipment configuration.
Grinding raw materials: gangue waste, material size 100mm
Fineness of finished product: 325 mesh for cement clinker production
Output requirements: 100 tons per day
Workshop work and rest arrangement: 12 hours / day work system
The common proportioning scheme of grinding process is introduced as follows:
Program 1: 5R Raymond mill powder production line, in addition to PEX150x750 jaw, elevator, silo, feeder, fan, analyzer, powder collector, motor, bag filter and other devices (the following program is roughly the same equipment, configuration will not be elaborated on, if there are differences in the analysis), the output of -3-9.5 tons / hour.
Program 2: YGM130 high-pressure roller mill, output -3-9.5 tons / hour, due to improvements in the structure of the high-pressure mill rollers, the same conditions under the productivity will be 20% higher than the Thunder Mill, the output will be a little higher.
Program 3: MTW110 European version of the mill, the maximum output of 10 tons / hour, can meet the output requirements, the biggest selling point advantage lies in high efficiency, energy saving, environmental protection, advanced production technology plus structural design improvements, production, high grade finished products, but this mill due to advanced technology, the price is much higher than the above two kinds.
Grinding production line equipment configuration has a lot to learn, production, finished product, capital, cost consumption of all aspects should be considered in place, in fact, in addition to the above three types of mills, there are ultra-fine micro-powder mill, vertical mill, trapezium mill, ball mill, etc., and the ball mill is only for the use of metal ore beneficiation, and the fineness of the finished product of up to 200 mesh, not much in the current industrial powdering applications, the micro-powder mill is in the special industry ultra-fine powder processing, the amount of use is limited, so the machine equipment due to advanced technology, the price is much higher than the above two. The amount of use is limited, so the choice of machinery and equipment should first understand clearly their needs, and then decide. Click on the website customer service consulting, 24 hours online.
