Summer precautions for sand production line
1. Summer is hot and dry, for the production of sand making equipment for the test, if the customer's schedule is tight, it will be a long time to practice the operation, the winter class is considered, the summer is really not appropriate, which will exacerbate the heating of the motor, accelerate the speed of failure, so in the summer work and rest time should be more reasonable arrangements, the development of scientific and reasonable work and rest time.
2. Many mining equipment damage is due to overworked production, sand production line overworked state of operation is not only low yield, the frequency of equipment failure will also increase, which requires stone manufacturers feed to avoid overworked production line.
3. Good cooling is a better way to reduce the chances of burning, through the external environment cooling, motor internal cooling dual method of combining methods of cooling treatment, the temperature reduces the chances of motor burning will be reduced by half, starting from the details, careful control of the production process of each link of the temperature detection.
4. The motor itself is a transmission device, good lubrication can reduce friction, thereby reducing the amount of friction in the process of heat generation, cooling treatment is also one of the very good method.
5. The body temperature is always monitoring, found that the temperature exceeds the safe range, can take special cooling program or shutdown processing, until the temperature returns to the normal range before production.
Summer heat is a severe test of each production equipment, cooling protection is very important, in addition to sand making machine bearings are also burned out failure of wearing parts, as with electric motors need to be extra careful. Also remind the site operators themselves should also do a good job cooling measures to prevent heatstroke, safety is the most important, the safety of workers is higher than anything else, a reasonable work and rest, prevention in advance, to do a good job in advance for the summer heat defense preparations.
Our design and production of a full set of sand production line equipment can be used for hard limestone, granite, basalt, river cobbles, metallurgical slag and other materials for aggregate and artificial sand making operations, suitable for hydropower, building materials, highways, urban construction and other industry applications. Click customer service free consultation, 24 hours online, looking forward to your message.
