Safety is the first requirement of crushing and grinding production line

Mining machinery is relatively large equipment, in use there is a certain safety risks, which is inevitable. Whether it is the manufacturer or buyer of the equipment and the workers at the production site, do not want to have accidents, so we must be very careful in the use of the tragedy to prevent the occurrence.

First of all, the equipment manufacturer has the obligation to remind, you can make a detailed description of the crushing equipment failure accident. Another point is also very important, any equipment will have the possibility of accidental failure, how to deal with accidents, which is the majority of manufacturers should have technological innovation, such as the emergence of similar accidents should be how to take the first time to take emergency measures, rather than waiting for firefighters to miss the rescue time, which requires the crusher manufacturers to improve and innovate in the safety of the equipment, increase the safety factor of the equipment, the safety faults Killing off the safety faults.

Secondly, as a stone crusher customers, safety education and training must be done, whether it is a stone plant or other production workshop has a clear safety precautions slogans, always reminding everyone of the importance of safety, in addition to regular organization of safety education and training, born in the relationship between the safety of all of us must be attentive to the problem, and must be equipped with safety measures, such as entering the workshop With helmets, wear overalls and other labor insurance products issued in a timely manner, if you can take certain mandatory measures is also possible.

Finally, as overhaul workers, operators should be more careful, safety is their own, out of the problem who can not be replaced, the operator should be in strict accordance with the operating instructions steps, there should be a fault problem after the power failure to check the processing, and as a technical overhaul personnel, knowledge and experience in this area is even more rich, power outage overhaul, maintenance is the most basic requirements, and also pay attention to the dangerous parts of the operation process Act with care, do not be careless.

Here we come to understand a few crushing machine failure precautions:

1. Operators wear helmets, shoes, overalls, gloves and other protective devices, and check whether the state of all parts of the machine is normal before starting the operation.

2. The operation process must not be distracted, especially in close contact with the machine to be extra careful.

3. Problems shall not be adjusted privately, should be stopped to wait for the professional maintenance personnel to repair, after the completion of the power to open into.

4. The order of starting the machine should be accurate, otherwise it will lead to different degrees of machine failure, maintenance personnel to increase the chances of danger.

5. For different positions to better develop a person in charge, so that it is easier to grasp the key points, reduce the failure rate.

6. Eliminate fatigue, whether the machine or the operator should have a reasonable work and rest time safety, fatigue will increase the chances of danger to the operator.

Dangerous accidents similar to the above need to work together to complete, as a crusher manufacturer deeply saddened but can not be undone, here to remind everyone: safety, life is greater than everything. We will also do our best to improve the safety performance of crushing equipment, not only to provide a high performance crushing equipment, more importantly, to provide a safe, reliable and stable operation of the stone crusher, the current environmental issues are also very serious, safety, environmental protection, functional innovation is the recent development of our company's three key directions, but also the goal of the struggle.