Raymond mill maintenance is more important than maintenance

Everything in this world has a life, the machine also has a service life. Raymond mill is a cold machine, but its service life is also very limited, if the daily production does not pay attention to, but also shorten its life, early into the scrap state, in fact, want to extend the use of the mill cycle, focus on maintenance.

So what are the specific matters of Raymond mill maintenance?

1. The operator is the closest contact with the mill, the most direct impact of the factors, standardized operation, can guarantee the effective stability of production, reduce equipment damage, which requires staff must undergo rigorous training before entering the workforce, as the saying goes, Bole Fang know a thousand miles, skilled operators are like Bole, can make the mill ship better results.

2. Raymond mill external working environment should pay attention to avoid open-air production, sun exposure, rain on the mill will produce varying degrees of damage, if the body of water, the effect is even worse, the mill leakage surface also need to be coated with antirust grease, rust stains should be immediately dealt with and do a good job of rust repair measures.

3. Mill accessories should also do a good job of maintenance and conservation, regular inspection and repair, from outside to inside one by one, better mill components list, to prevent the phenomenon of omission, found that wear and tear of serious parts need to be replaced with new, loose or missing bolts need to be replenished and tightened.

4. Raymond Mill accessories in the transmission parts, lubrication work must be done, the lubricant is not easy to add too much or too little, winter and summer lubricant selection should be correct, and this part of the cleaning work must pay attention to impurities will contaminate the lubricant to affect the lubrication effect, better according to the intensity of the work on a regular basis to thoroughly clean up and add a new lubricant.

5. Mill working hours should be well planned in detail, try to avoid overworked operations, overworked operation is not only low productivity, huge damage to the machine, is to shorten the service life of one of the killers.

6. Production link material additions, material humidity should be controlled within the effective range of material particles, additions or large or small on the grinding rollers wear parts have a certain degree of abrasion, humidity is too large material is not easy to grind directly, not only will cause blockage, there may be rust and corrosion of internal parts.

7. The implementation of the above links, are required to specialize in the implementation of the regulatory authorities to implement the development of a reasonable management and operation system, maintenance and repair methods, in accordance with the plan to implement step by step, and found that violations of the phenomenon in a timely manner to stop, to ensure that the maintenance of good to do a good job.

If you have any questions want to consult, please feel free to click the website customer service, 24 hours online.