Raymond mill can be used for those materials

What are the types of materials that can be ground by Raymond mill? What are the specific requirements? Below we have an in-depth understanding of the Raymond mill on the applicability of material analysis and introduction.

Analysis of the types of materials that can be ground

As a professional stone mill, its grinding object is naturally all kinds of ores, such as phosphate rock, lime, calcite, barite, limestone, gypsum, bentonite, talc, potassium feldspar, dolomite, activated carbon, marble, quartz, glass, kaolin, cement, construction waste, thermal insulation materials, such as more than 280 kinds of materials for high-fine powder grinding.

Material case study

Case 1: Limestone powder is mainly used in power plant desulfurization, concrete mixing plant and chemical industry and other types of industrial raw materials, Raymond mill can be used in accordance with the actual application of limestone grinding into 30-425 mesh of different specifications of the powder, lime powder common fineness of 200 mesh, 325 mesh, 800 mesh and other fineness, of which 325 mesh has the most extensive application range, the largest amount of dosage.

Case two:

Construction waste recycling and reuse, construction waste and ore comparison is different, it belongs to the mixture of materials, the nature of each convenience is difficult to control, such as hardness, humidity, impurities, etc., in the current environmental protection under the call of the world in the call for ecological environment construction, construction waste, industrial waste recycling and reuse in solving the problem of environmental pollution under the premise of letting the resources be effectively utilized, it can be said that a two-for-one solution, the construction waste through the jaw Construction waste by jaw crusher, industrial mill, sand maker and other crusher processing can be re-user concrete materials, construction waste recycling and re-processing technology is constantly exploring and innovation, and at the same time require grinding equipment in the production process and quality of the finished product improved, general new development and production of high-pressure roller mill, European mill belongs to the Raymond machine upgraded products, the finished product fineness uniformity and meticulous, and large output, high efficiency, used for Construction waste treatment is just right.

Material performance requirements analysis

Although Raymond mill is a stone powder grinding device, but there are clear requirements for raw materials, such as raw material particle size, material hardness, humidity and so on.

1. Material particle size, type mill feed port size varies, 3R to 6R Raymond Mill maximum feed size range between 15mm-35mm, if beyond this maximum feed requirements need to be crushed by the jaw crusher and other crushing devices pre-processing.

2. Material hardness, in addition to ultra-fine micro-powder mill, most of the ore mills can grind all kinds of non-flammable and explosive ores with Moh's hardness below 9.3 and below.

3. Material humidity, grinding equipment, material screening, conveying by wind to complete, too much humidity is not easy to grind the ingredients and powder screening and conveying, mill on the humidity requirements are strict, the general material moisture should be maintained at 6% or less.

Our company develops and produces Raymond mill with stable performance and affordable price, and on this basis, upgraded research and development of a new type of Raymond mill, European version of the mill, ultra-fine powder mill and other new grinding devices, powder quality powder rate can be increased by 20%. Welcome to click on the website customer service consulting, 24 hours online.