Quarry sand production line design program and process flow

Quarry sand production line is a specialized production process for producing construction sand and stone, which is used to process and produce various kinds of stone materials into mechanism sand. The following is mainly an introduction to several groups of common quarry sand production line configuration program, as follows:

The usual stone quarry sand production line design scheme depends on whether the stone material belongs to hard or soft stone material, and whether it needs fixed site operation or mobile operation.

1. If the stone is soft, such as lapis lazuli, limestone, etc.

The general configuration is feeder + conveyor belt + jaw crusher + transit silo + impact crusher + (sand making machine + sand washing machine) + vibrating screen. Take 800 tons per hour limestone crushing production line as an example for a brief introduction.

Processing material: limestone

Output: 800T/H

Discharge size: 0-5mm, 5-10mm, 10-15mm, 15-25mm

Process flow: the raw material is conveyed to PE jaw crusher through vibrating feeder for primary crushing, then conveyed to PF impact crusher for secondary crushing after screening with vibrating screen, the crushed material is conveyed to sand making machine through conveyor for sand making, and then screened by four vibrating screens to produce four kinds of finished materials.

2. If the stone material is hard, such as granite, basalt, river pebbles and so on

The general configuration is feeder + conveyor belt + jaw crusher + transit bin + cone crusher + (sand making machine + sand washing machine) + vibrating screen. The following is a brief introduction of river pebble sand production line as an example.

Processing material: river pebbles

Capacity: 600T/H

Feed size: <500mm

Discharge size: 0-5mm, 5-10mm, 10-28mm

Process flow: the raw material enters into two PE jaw breakers through vibrating feeder for rough crushing, the material less than 10mm is screened out by two vibrating screens for raw sand, and the rest enters into the adjusting bin of cone breakers, which is transported to three cone breakers for secondary crushing. The crushed material is screened by vibrating screen, the material larger than 40mm is returned to cone crusher to be crushed again, and the material below 40mm is fed into 3 sets of VSI sand making machine through the adjusting silo of sand making machine to be shaped and made into sand.

3. For mobile operation

The general configuration is mobile jaw crusher + mobile impact crusher / mobile cone crusher. This mobile crushing production line can be flexibly matched with various crushing equipments (jaw crusher, impact crusher, cone crusher, etc.) as the host according to the specific production needs, which can meet the requirements of crushing production line configuration in various situations such as hard, soft, site, etc. In addition, the mobile crushing production line is highly mobile and convenient, which can greatly reduce the cost of transportation of raw materials to meet the needs of production in different sites, and has low energy consumption, green and environmental protection. Green and environmental protection.

The configuration of sand production line in quarry needs to be comprehensively calculated and selected according to the environment, materials, investment and other factors. If you want to get a detailed configuration plan, you can call or leave a message, a brief description of your needs, we can customize the production line program for you free of charge, and as a direct seller, we give the production line equipment offer is also more favorable, there is a need for friends can click on the website customer service online free of charge consulting, 24-hour consultation.