Post-Installation Procedures for Vertical Impact Sand Making Machines

1. After installing and repairing the impact sand making machine, we proceed with machine adjustments. Following proper installation, we conduct comprehensive inspections and trial runs as required. Verify that lubrication lines are securely connected. Before commissioning, apply molybdenum disulfide (MoS₂) grease or No. 3 lithium-based grease, and inspect all component joints.

2. Thoroughly inspect the impeller for foreign objects and promptly remove any found. Verify correct motor wiring and normal voltage. Before installing the drive belt, start the motor. The motor's rotation direction must match the sand maker's marked direction (i.e., viewed from the feed inlet, the impeller rotates counterclockwise). If opposite, adjust the motor wiring to align with the sand maker's designation.

3. For dual-motor drive configurations, connect an equal number of V-belts to the main shaft assembly and both motors. Adjust tension to ensure uniformity and straight alignment. After inspection, conduct both no-load and load trial runs before production handover.

The above outlines installation precautions for vertical impact sand makers. Proper installation is essential to ensure subsequent production, so this process must not be overlooked. If you require an impact sand maker, click the website customer service for immediate free consultation—available 24/7.