Maintenance work of ceramic ball mill

The barrel of ceramic ball mill is made of ceramic, which is used in the production industries of mineral processing, chemical and building materials, new construction materials, refractory materials, chemical fertilizer and non-ferrous metal beneficiation, etc. It is well liked by consumers, but users find in their daily work that the machine's production efficiency will drop due to various reasons. At this time, the ceramic ball mill maintenance work is particularly important, the following points are the maintenance work summarized in this paper:

1. Regularly stop grinding, check important parts such as: hollow shaft, main bearing, cylinder, reducer, large and small gears, etc., do a good job of recording, and give appropriate treatment according to the defective situation.

2. During the operation of ceramic ball mill, the temperature rise of main bearing lubricant should not exceed 55℃, and the temperature rise of transmission bearing and reducer should not exceed 55℃, and the maximum should not exceed 60℃. Liming Heavy Industry reminds users that the lubricating oil should all be released after one month of machine use, thoroughly cleaned and replaced with new lubricating oil. In addition, the lubrication point lubrication and oil surface height at least once every 4 hours to check.

3. Clear the debris in the ceramic ball mill regularly to avoid overloading the motor after winding the chain and damaging the motor and reducer. Also check whether the chain, drum and sprocket of ceramic ball mill are excessively worn. Check the tightness of all bolts, and tighten them in time if they are found to be loose.

4. The lining plate should be replaced when it is worn by 70% or has 70mm long cracks; the main bearing should be replaced immediately when it is seriously worn; ensure the large and small gears drive smoothly without abnormal noise, and adjust the clearance in time if necessary.

5. Steel balls should be added according to the wear condition, and if abnormal conditions are found, the grinding should be stopped immediately for maintenance.

The crushing and grinding equipment produced by our company adopts advanced technology, elaborate design and focus on quality. If you new and old customers are interested in the relevant equipment, welcome to our company at any time to buy and inspect. We have production lines in many parts of the world that have been put into use, and also have local offices that can take you on site visits. Welcome to contact our website customer service, 24 hours online, to provide free consulting services!