Introduction to the arc air duct design of the European mill

Europe version of the mill and the traditional mill in the appearance of the difference is extremely easy to find, streamlined structure is not only beautiful in appearance, but also to make the new Raymond mill in all aspects of performance have been improved, especially the output, so the mystery of the arc duct design in the end where is it?

Mill host below not only more than one internal thin oil lubrication system, the base of the snail shell structure, no vortex small observation door, the transport of the wind are very good diversion, the fan is connected to the snail shell, and then into the grinding chamber, no resistance into the wind channel, the airflow in the process of transmission is unobstructed. In addition to the side of the small observation door, no convex and concave structure between the inner wall, to avoid the wind here to form a vortex, general Raymond machine in the observation door at the inner side of the depression, by the principle of fluid dynamics can be known, the wind in the transport process will form a cyclone vortex, affecting the strength of the transmission, from the point of view of physics, the smoother the surface, the lower the resistance friction, the smoother the natural transmission.

From the base and then look upwards, the analyzer below the grinding chamber above, the pipe wall is also a curved structure, after grinding the material under the action of the fan with the wind upward flow, if there is a dead end in the pipe wall, dust is easy to accumulate here, affecting the transmission speed. In addition, the analyzer above the host top arc design is also to follow this principle, Raymond mill top and pipe connected to the place is not connected as a whole, but the central part of the host diameter than the conveyor pipe is much larger than the host and other redundant parts of the transmission of materials have a certain degree of obstruction, the ordinary Raymond top parallel structure, when the material is screened through the classifier and transmitted with the wind did not enter the pipeline part of the collision will occur with the top, after being subjected to the wind, the material will collide with the top, the dust will be easily accumulated. Will collide with the top, under the action of gravity will return, so that the impact on the production efficiency is very large, the European version of the top of the mill adopts a curved structure, the material in the transmission process is like entering the inverted V-shaped pipe, the material with the curved pipe wall into the pipeline, the entire top of the 360-degree dead-angle-free structure, the material transfer efficiency by more than 20%.

Arc duct architecture seems simple, in fact, contains a variety of physics principles are quite a lot, mainly from the fluid dynamics, resistance, friction to consider, the European version of the mill is not only a patented product of OCP Mining Machinery, in the entire milling industry is also other grinding equipment can not be compared to the advanced technology. If your business is in urgent need of a mill, the European version of the mill must be a good choice, of course, you can also buy other types of grinding equipment, our company's production base within the model complete, for your inspection and selection. Welcome to consult the customer service free consultation and purchase.