How to adjust the fineness of Raymond mill processing

In the introduction of the technical parameters of the Raymond mill, we can see that the processing range of the equipment between 80-325 mesh, the user can adjust the fineness at will. For the adjustment of the fineness of the equipment, many people are not very clear, Raymond mill processing fineness is how to adjust it?

There are two main ways to adjust the Raymond mill, one is by adjusting the speed of the equipment. We know that the faster the rotational speed of the equipment, the worse the grinding effect, the lower the fineness of the powder; on the contrary, the slower the rotational speed, the better the grinding effect on the material, the higher the fineness of the material.

Another method is to adjust the speed of the fan, the higher the fan speed, the larger the particles of the material can be blown up, the lower the fineness; on the contrary, the low speed of the fan, the material can be blown up the particles are small, the finer the fineness is also higher.

However, the adjustment of Raymond mill fineness is not simply adjust the speed or fan on the line, need to be debugged by professionals. Therefore, if the user needs to adjust the fineness of the equipment, you need to contact the manufacturer, under the guidance of technical personnel to adjust.

OCP provides a complete set of milling production line including host equipment and ancillary equipment. The main machine includes main machine, fan, analyzer, corresponding motor, bag duster, cyclone collector and connecting pipes. The supporting equipment can be jaw crusher, pulse dust collector, elevator, electromagnetic feeder or automatic belt feeder, electric control cabinet, gas conveying, silo and so on.