High quality titanium dioxide processing need to pay attention to what

Mill quality is an important factor affecting the quality of titanium dioxide, but there are other factors that also affect the quality of the finished product, as a powder manufacturer we should pay attention to what?

First of all, the quality of titanium dioxide raw materials should be guaranteed, in the grinding room before grinding in addition to impurity work should be perfect, titanium dioxide is mainly composed of titanium dioxide (TiO2) white pigment, the whiteness requirements are high, impurities are the key to affecting the quality of the powder, and in addition, raw material humidity should be in the range of suitable mill processing.

Secondly, the control of fineness in grinding, fan air volume regulation, etc. Now the fineness of grinding equipment can be adjusted, the fineness of the finished material should be in the corresponding mill control range and then mass production, the trial operation is a better way to measure the qualified powder, the analyzer speed, the size of the air volume is two regulating variables, according to the instructions and under the guidance of the professional and technical guidance of the mill modulation to run in a better state is appropriate.

In addition, the operator's technical level, the operator is concerned about the operation of the machine, the key to mastering the quality of the production line of grinding production, operating errors caused by unqualified finished products, frequent machine failures also occur, it is recommended that the pre-service training for the production of good preparation.

Finally, the transport of finished products pay attention to moisture and rain, any powder material is more sensitive to humidity, if the storage is not reasonable is likely to cause lumps and clusters of problems, the need for a second grinding can be, so laborious and time-consuming is not worth it.

Titanium dioxide production and processing is not a single stone grinding to powder so simple, it is about a business profit loss rise and fall, the domestic titanium dioxide application occupies the proportion of: paint accounted for 60%, plastics accounted for 20%, paper accounted for 14%, and other (including cosmetics, chemical fibers, electronics, ceramics, enamel, welding rods, alloys, glass, and other fields) accounted for 6%, titanium dioxide ore plus a high-quality titanium dioxide grinder with which, the finished product With reinforcing, anti-aging properties, is a high-quality coloring agent.

The reason why titanium dioxide mine mill manufacturers choose OCP, first of all, we are more than thirty years old brand of grinding equipment, professional mill manufacturers, focusing on the production of various types of mineral powder mills, from coarse powder to ultra-fine powder grinding machine R & D and production; secondly, by our hard power is visible in the warehouse of small and medium-sized models of mills in stock, the sample machine, the test site is readily available; and we have customers in 130 countries and regions around the world on-site In addition, we have customer sites in 130 countries and regions around the world, and we can provide nearby customers with on-site inspections; finally, we have a professional technical service team, and the machine provides lifelong technical support. Welcome to click on the website customer service to learn more, 24 hours online.