Hammer crusher working precautions

The maintenance and precautions of the hammer crusher are as follows:

1. Pay attention to the fixing and tightening of the fasteners regularly.     

2. Regularly check the sieve bar adjustment, if there is any blockage, it should be cleared immediately.    

3. Pay attention to check the wear and tear of the easy-to-wear parts, and replace the worn parts at any time.     

4. Feed the material evenly to prevent the phenomenon of over-negative.     

5. When the machine is running, it is strictly forbidden to make any adjustment, cleaning and maintenance work to avoid danger.     

6. If the machine fails to work, it should stop immediately for repair before continuing to work.     

7. When stopping, all the materials in the machine must be spit out, and the power must be cut off first when overhauling.

8. Bearing refueling to be timely, three months to replace the lubricant once, oil change must be clean gasoline or no careful cleaning of the bearings.

If you plan to purchase new crushing and grinding equipment, welcome to visit our production base. You can also consult our website customer service first to understand, 24 hours online, to provide free consulting services.