Factory direct price of vertical shaft impactor for perovskite 80 tph in Canada

For titanium and rare earth processing in Canada – with notable perovskite (CaTiO₃) deposits in the Montviel carbonatite complex (Quebec) and the Prairie Lake project (Ontario) – a 80 tph vertical shaft impactor (VSI) is a key asset for producing cubical, well‑graded sand for downstream beneficiation. Perovskite is moderately hard (Mohs 5‑5.5) and can be brittle, often associated with calcite, apatite, and magnetite. A VSI with a rock‑on‑rock chamber produces a cubical product with low flakiness, ideal for further grinding or flotation. Understanding the factory direct price of vertical shaft impactor for perovskite 80 tph in Canada helps you budget for a machine that balances energy efficiency, wear costs, and product quality while meeting Canadian environmental and safety standards. OCP Mechanical Company, a direct manufacturer with over 40 years of experience, supplies Type V VSIs designed for North American hard rock and industrial minerals, backed by 24/7 online support.

Note: Product data are constantly updated; the latest specifications should be confirmed with our online customer service.

Why a VSI is a practical choice for perovskite sand

Perovskite is often crushed to a fine, cubical product before magnetic separation or flotation. A VSI (Type V-80) with a 90‑132 kW motor, rock‑on‑rock chamber, and tungsten carbide tips is a widely used configuration. At a rotor speed of 1,450‑1,600 rpm, it can process 10‑40 mm crushed perovskite into 75‑90 tph of 0‑5 mm cubical sand. Many Canadian mineral processors have successfully used this VSI size, reporting consistent sand shape and predictable wear costs. The rock‑on‑rock chamber minimizes iron contamination, preserving the purity of the titanium concentrate.

Key features that lower your cost per ton of perovskite sand

When you evaluate the factory direct price of vertical shaft impactor for perovskite 80 tph in Canada, focus on features that directly reduce operating expenses:

• Tungsten carbide rotor tips – Essential for perovskite with hard gangue (magnetite, apatite). Tip life: 120‑180 hours, processing 10,000‑15,000 tons per set.

• Rock‑on‑rock chamber – Eliminates metal‑to‑mineral contact, reducing iron contamination and improving product purity.

• Variable frequency drive (VFD) – Allows rotor speed adjustment; lower speed reduces tip wear and fines generation, higher speed improves shape. Saves 8‑12% on electricity.

• Cascade gate (20‑30% bypass) – Reduces tip wear by 15‑25% with minimal impact on sand shape.

• Hydraulic lid lifter – Enables quick tip changes, reducing downtime.

• Cold‑weather package (recommended for Canada) – Oil sump heater, low‑temperature hydraulic oil, and insulated lines for winter operation. OCP offers a complete winterization kit.

All price information in this article is for reference only; contact our team for a current, site‑specific quote.

A Type V-80 VSI with VFD, carbide tips, and rock‑on‑rock chamber ex‑works typically ranges from $55,000 to $85,000 USD. Shipping to Canadian ports (Vancouver, Montreal, Halifax) (CIF) adds $6,000‑$12,000. A starter set of tips, feed tube, and V‑belts adds $1,500‑$2,500. Total landed cost is approximately $65,000‑$100,000 USD. Import duties and taxes apply; OCP provides full customs documentation.

How to reduce your cost per ton with proper operation

The factory direct price of vertical shaft impactor for perovskite 80 tph in Canada is only part of the investment – operating practices greatly affect profitability. Set rotor speed at 1,450‑1,550 rpm initially. Use cascade mode at 25% to lower tip wear. Pre‑screen the feed to remove material below 5 mm and above 40 mm. Fines cause abrasive wear; oversize damages tips. Maintain a choke‑fed condition – a full rotor chamber ensures rock‑on‑rock crushing and even tip wear. Inspect tips every 50‑60 hours and rotate them (if reversible) to extend life by 30%. Keep a spare set of tips and a feed tube on site.

Return on investment for a perovskite sand plant

At 80 tph for 2,500 hours/year (200,000 tons), annual operating costs (tips, electricity, maintenance) typically range from $25,000 to $45,000. Perovskite concentrate (titanium and rare earth elements) has high value per ton, so even a small improvement in recovery or product quality provides rapid payback. The VSI investment is often recovered within 6‑12 months. Factory‑direct pricing from OCP saves 15‑20% compared to other suppliers, with predictable wear part costs.

How to get an accurate factory direct price for your perovskite operation

To receive the current factory direct price of vertical shaft impactor for perovskite 80 tph in Canada, simply click the live chat icon on this page. Provide your feed size, desired sand gradation, and site location (including winter temperature range). Within 2‑4 hours you will receive a detailed quotation including ex‑works price, shipping to your port, lead time (20‑25 days), and a starter tip set. Actual plant output depends on perovskite hardness and gangue content; for a site‑specific recommendation, consult our engineers.

OCP keeps common VSI tips, feed tubes, and VFD components in our North American warehouse for fast delivery to Canada. We also offer remote commissioning and operator training via video call, ensuring your VSI reaches design capacity quickly.

Why OCP is your trusted VSI supplier for perovskite in Canada

Understanding the factory direct price of vertical shaft impactor for perovskite 80 tph in Canada is only the first step – you also need a partner who backs you with cold‑weather‑ready equipment, CE/CSA compliance, and technical advice. OCP Mechanical Company has four decades of experience in VSI technology for industrial minerals. Our 24/7 online team helps with speed tuning, tip rotation, and winterization. We invite you to request a no‑obligation quote and experience factory‑direct pricing.

For a no‑obligation factory direct price of vertical shaft impactor for perovskite 80 tph in Canada, simply click the live chat icon on this page. Our online customer service team is available 24 hours a day, 7 days a week, to provide free price quotes, equipment recommendations, and installation advice – helping you produce premium perovskite sand more efficiently and profitably.