Daily output of 5000 tons of sand and gravel production line configuration plan

In this article, we share two kinds of 5000 tons per day sand and gravel production line configuration, for reference only, if there is still more demand, you can consult online, the following is the detailed equipment configuration and production process.

A. “Low hardness materials” 5000 tons per day sand and gravel production line configuration plan

Configuration equipment: raw material silo + vibrating feeder + jaw crusher + impact crusher + vibrating screen + conveyor belt

Applicable materials: limestone, lapis lazuli, gypsum and other low hardness materials

Estimated investment: about 3** million dollars

Feed size: ≤800mm

Finished product specification: 0-5mm, 5-10mm, 10-20mm, 20-30mm

Production process: standard gravel production line configuration, including feeding, coarse crushing, crushing, screening

1. Feeding: The materials in the raw material warehouse are put into the jaw crusher evenly through the vibrating feeder;

2. Coarse crushing: when the material enters into the jaw crusher for coarse crushing treatment, the use of tiger crushing, strong, feed size up to 1020mm, discharge opening adjustment range of 150-350mm, and then transferred to the crushing equipment;

3. Medium crushing: the impact crusher is mainly medium crushing, the feed size of 700mm, through the gap between the impact plate and the plate hammer to adjust the size of the discharged material, with a certain degree of shaping function, good-looking particle shape;

4. Screening: When the impact crusher is crushed, it is directly transferred to the screening machine, and through the 4-layer screening machine to separate the different grain shape materials can be transferred to the finished product area.

B. “High hardness material” 5000 tons per day sand and gravel production line configuration plan

Configuration equipment: raw material silo + vibrating feeder + jaw crusher + cone crusher + vibrating screen + cone crusher + conveyor belt

Applicable materials: granite, basalt, iron ore and other materials with high hardness.

Estimated investment: about 8** million yuan

Feed size: ≤1000mm

Finished product specification: 0-5mm, 5-10mm, 10-20mm, 20-30mm.

Production process: the production line with the finished material requirements are not very high

1. Feeding: the same vibrating feeder will put the materials into the jaw crusher evenly;

2. Rough crushing: Jaw crusher crushes the material roughly, with large crushing ratio, and after crushing, it is directly transferred to the second stage of medium crushing;

3. Medium crushing: Cone crusher has the function of fine crushing, that is to say, it contains medium crushing and fine crushing, which saves cost, has strong crushing strength, good grain shape and less needle flake;

4. Screening: through the vibrating screen machine to screen out the material specifications that users want.

Third, more 5000 tons per day sand and gravel production line configuration plan, support customized

There are many factors that affect the investment cost of a 5000 tons per day sand and gravel production line, such as production site, investment budget, factory procedures, environmental protection certificate, equipment requirements, finished product requirements and so on. Click on the free online consultation to learn more about the configuration of 5000 tons per day sand and gravel production line, support for customized, one-on-one engineers to provide you with an exclusive production line configuration program.