Cone Crusher Industry Common Terms

New users of cone crusher are not very familiar with some industry terms in the manual of the crusher. To address this, our technical staff for you to carry out the relevant introduction:

1. Feed: the material that needs to be crushed in the crusher;

2. Liner: molar wall and crushing wall;

3. Crushing cavity: the internal structure of the space formed by the two crushing elements, where the cone crusher crushes the materials;

4. Parallel belt: a distance of the lower part of the molar wall and crushing wall is parallel, so it is called parallel belt;

5. Closed-side feed opening: when the two crushing elements that make up the crushing chamber are swung into close proximity, this distance is known as the closed-side feed opening; conversely, it is known as the open-side feed opening;

6. Discharge port: it is the outlet for discharging finished products, which is divided into small discharge port, open side discharge port, etc. according to the demand;

7. Cone crusher open circuit: no need for product size uniformity, the material can pass through the crusher at one time;

8. Closed loop: the uniformity of product size is required, that is to say, until the material is discharged after the particle size is uniform.

We are a professional manufacturer of crushing and grinding equipment, if you are interested in our company and our products, you are welcome to visit our company or our local office, you can also send an email or leave your contact information, our staff will contact you as soon as possible to provide you with product information and application knowledge, so that you can not only get the high quality of the new equipment but also get the attentive service.