Comprehensive analysis of impact crusher frame
The impact crusher is a new type of high-efficiency crushing equipment, which is composed of many parts. The multi-stage impact chamber of the impact crusher has enough crushing space and is suitable for crushing large materials. Every component of the impact crusher plays a vital role, and the frame is no exception. Many manufacturers and users still attach great importance to the importance of the frame. Below we will discuss the impact crusher frame Conduct a comprehensive analysis and describe in detail from four aspects: composition structure, function, strength and welding process.
1. The structure of the frame: The frame of the impact crusher is composed of two parts, the upper frame and the lower frame, which are connected with each other by bolts. The upper frame above the axis of the rotor is equipped with side doors and rear doors for inspection and installation. Below the axis of the rotor is the lower frame, which is fixed on the foundation with bolts and mainly bears the weight of the entire machine. Replaceable wear-resistant liners are installed on all parts in contact with ore inside the frame.
2. The role of the frame: the components of the impact crusher are highly interchangeable, and there are few types of wearing parts, which is convenient for the procurement and management of spare parts. The frame of the impact crusher is a three-part structure, and the rear casing of the impact crusher can be opened to perform inspection and maintenance operations such as replacing the blow bar, impact plate, and liner.
3. Strength analysis of the frame: The strength of the frame is very important for the equipment. Since the impact crusher is working, its frame bears a very large impact force, so it should be given sufficient compressive strength when designing , OCP reminds users to pay attention to the strength of the rack, not just considering the cost, installation and other aspects.
4. Welding analysis of the frame: Before the impact crusher frame is welded, when the groove is prepared by gas cutting or carbon arc gouging, the processing quality should be ensured to prevent the surface from being uneven, and the unqualified ones should be ground. There shall be no defects such as cracks, slag inclusions, delamination, etc., otherwise they shall be removed or repaired.
If you plan to purchase crushing and grinding equipment such as crushers, stone crushers, and mills, please call and consult online customer service. We provide free production line configuration services.
