Can a machine for processing stone break 12 stones
The machine for processing stone, also called crusher, it does not refer to only one machine, but a variety of crushing machines in general. So far, the process performance of the crusher on the market are developed more mature, and there are many types.
A. Types of crusher
1.Jaw Crusher
Jaw crusher is used for primary coarse crushing, the material is conveyed into the jaw crusher through the feeder for initial crushing, crushing the large stones into smaller stones; at the same time, because of its internal iron remover, it can discharge the debris that can't be crushed, which is convenient for the subsequent medium and fine crushing work; the equipment has small volume, large crushing ratio, low energy consumption and simple operation.
2.Impact Crusher
Impact crusher is used for secondary fine crushing, its feed size is below 500mm, the materials after jaw crushing can be transported to the impact crusher for re-crushing; but it is only suitable for crushing soft stones, crushing hard stones, it is very easy to cause damage to the key parts; it is inexpensive, and it has the function of shaping, and the finished product is good in grain size, but it can't be used for sand making.
3. Cone Crusher
Cone crusher, like impact crusher, can be used for secondary medium and fine crushing; compared with impact crusher, it can crush hard materials and has large output, but the granularity is a little bit poor; full-automatic control system, easy to realize the remote control, high degree of intelligence; over-ferrous iron protection and automatic cavity clearing function is perfect, low failure rate, but the price is relatively expensive.
4.Heavy hammer crusher
Suitable for crushing limestone and medium hardness stone with compressive strength lower than 200Mpa, output range of 100-3000t/h; large hammer head, double power, making the size of the material once crushed into shape, no need for secondary crushing; saves the use of other crushing machines in the process of production costs and time spent.
5.Mobile crusher
Compared with the first four kinds of crusher, its highlights are: it can be freely combined with other crushers, flexible and mobile, the operation of the surrounding site, road transportation conditions require very little; at the same time, it can also be equipped with power generation unit, in the power outage, no electricity, and other special circumstances can still be operated normally to ensure that the continuous, normal production; in general, it is a “walk” production line. Overall it is a “walking” production line.
B. Can break 12 stones?
12 stone particle size: 10-20mm, mostly used for small low building, collapse will be good, high security, high mobility.
If you rely solely on one of the above stone processing machines, it is difficult to break 12 stones. Broken 12 stone also need a variety of auxiliary equipment, and crusher with a production line process. Here to introduce a case of our engineers configured crushing 12 stone production line that has been put into production.
Stone: granite
Cost: *0 million or so
Capacity: 100T/H
Production line: vibrating feeder + PE-600 * 900 jaw + cone crusher + vibrating screen + conveyor 5 sets
Customer feedback: the whole production line equipment configuration is reasonable, each machine is fully utilized; the cost is not too high, the output is large, the quality of the finished product is good, the sales volume is very good, and the comprehensive benefit is high.
If you are interested in crushing 12 stones and want to know more about the detailed information of the crusher, welcome to click on the website customer service immediately for free consultation, 24 hours online.
