Buy a used sand screw washer for silica flour 68 tph in Malaysia

For silica flour producers in Malaysia – with major operations in Perak, Johor, and Sarawak – a 68 tph sand screw washer is essential to remove clay, iron stains, and ultrafines from crushed quartz or silica sand, producing high‑purity silica flour for glass, ceramics, and industrial fillers. Buying a used screw washer can cut initial investment by 40‑60% compared to new, while still delivering reliable performance when properly reconditioned. Knowing where to buy a used sand screw washer for silica flour 68 tph in Malaysia helps you source a corrosion‑resistant, efficient machine with local support. OCP Mechanical Company, a factory‑direct manufacturer with over 40 years of experience, supplies certified used Type W sand screw washers that are fully inspected, reconditioned, and backed by a warranty, with delivery to Malaysian ports and 24/7 online assistance.

Note: Product data are constantly updated; for current inventory of used sand screw washers, please contact our online customer service.

Why a used sand screw washer is a smart choice for silica flour in Malaysia

Silica flour production requires strict control of iron contamination (Fe₂O₃ <0.01‑0.05%) and fine particle recovery. A sand screw washer gently scrubs silica sand to remove impurities while preserving particle size. A used washer, when reconditioned with new polyurethane wear shoes, bearings, and seals, can deliver the same washing efficiency as a new unit. Many Malaysian silica flour processors have successfully used reconditioned screw washers, reducing capital outlay and achieving consistent product purity.

What to look for when buying a used sand screw washer

When you buy a used sand screw washer for silica flour 68 tph in Malaysia, inspect or request a report on these key components:

• Screw shaft and flight – Check for straightness and wear. Worn flights reduce lifting capacity.

• Wear shoes – Polyurethane shoes should be intact; replace if cracked or worn beyond 50%. OCP installs new polyurethane shoes as part of reconditioning.

• Gearbox – Listen for unusual noise or oil leaks. OCP serviced gearboxes included.

• Trough liners – Inspect for holes or excessive wear; replace if needed.

• Bearings and seals – Worn bearings cause shaft misalignment. OCP replaces bearings as part of reconditioning.

• Water injection nozzles – Ensure they are not clogged; replace with stainless steel for corrosion resistance.

OCP’s used washers are disassembled, inspected, and rebuilt with new polyurethane wear shoes, bearings, seals, and gearbox oil. We provide a 6‑month warranty on the shaft and gearbox – giving you peace of mind.

All price information in this article is for reference only; contact our team for a current, site‑specific quote.

A reconditioned used sand screw washer for 68 tph ex‑works typically ranges from $12,000 to $22,000 USD – compared to $25,000‑$40,000 for a new unit. Shipping to Malaysian ports (Port Klang, Penang, Johor Bahru) adds $3,000‑$6,000. A starter set of polyurethane shoes, bearings, and V‑belts adds $800‑$1,500. Total landed cost is approximately $16,000‑$30,000 USD, saving you 40‑60% over new.

How to buy a used sand screw washer in Malaysia

To buy a used sand screw washer for silica flour 68 tph in Malaysia, simply click the live chat icon on this page. Provide your feed sand characteristics (purity target, clay percentage), and site location. Within 2‑4 hours you will receive a list of available units with hours, reconditioning work done, and price. You can request a video inspection of the washer running under load. After selection, we arrange shipping and provide remote installation guidance. Actual washing efficiency depends on feed characteristics; for a site‑specific recommendation, consult our engineers.

OCP keeps common wear shoes and spare parts in our regional warehouse for fast delivery to Malaysia. We also offer a rent‑to‑own option for qualified buyers.

Why OCP is your trusted source for used sand screw washers in Malaysia

Choosing to buy a used sand screw washer for silica flour 68 tph in Malaysia is a smart financial decision – but you need a supplier who delivers quality reconditioned equipment and after‑sales support. OCP Mechanical Company has four decades of experience in sand processing equipment for the Asian market. Our 24/7 online team helps with weir adjustment, speed tuning, and troubleshooting. We invite you to request a no‑obligation quote and factory‑direct reconditioned equipment.

For a no‑obligation buy a used sand screw washer for silica flour 68 tph in Malaysia, simply click the live chat icon on this page. Our online customer service team is available 24 hours a day, 7 days a week, to provide free price quotes, equipment recommendations, and installation advice – helping you produce high‑purity silica flour with lower capital investment.