All machinery must be shut down when repairing sand making equipment

As long as one of the equipment in the sand making machine is not working, it will affect the progress of the entire production. At this time, it needs to be repaired to ensure that the sand production line will not be stagnant due to a certain equipment. situation. Next, let’s take a look at the places where these devices need our attention:

1. The tools required at hand should be fully prepared. After determining the failure of the sand making machine, how to repair it should be well thought out, so as to avoid the situation of jamming when the parts are disassembled.

2. When using tools to remove screws and nuts, the force should be uniform, and do not twist too quickly or forcefully, so as not to screw the parts.

3. When it is necessary to use wire cutters to clamp tools such as files without handles and scrapers, the operator must be careful to avoid pinching fingers.

4. Regardless of which part of the sand making machine is being repaired, the equipment must be in a shutdown state during maintenance.

5. After the faulty sand making machine equipment is repaired, it must go through a test machine and inspection, in case the equipment is installed and it is found that there are fewer parts installed or the equipment still cannot work normally.

If you need to purchase ore crushers, sand making machines, pulverizers, mobile crushing production lines and other related equipment, please consult the website customer service, 24 hours online.