100 TPH Sand Washing Plant for Manufactured Sand in Ho Chi Minh City

Ho Chi Minh City‘s Construction Boom: A Market Defined by Unprecedented Demand

Ho Chi Minh City is at the epicentre of Vietnam’s infrastructure transformation. The city recently inaugurated and commenced construction on 11 projects with a total investment of over VND 181,412 billion (approximately $7.3 billion)**. Major metro expansions are advancing rapidly, including the Ben Thanh–Tham Luong section (11.3 km, over VND 55 trillion), the Ben Thanh–Thu Thiem section, and four additional metro lines planned to break ground in the fourth quarter of 2026. The **$16-billion Long Thanh International Airport—expected to handle 100 million passengers annually—is scheduled to begin commercial operations in late 2026. These mega-projects, along with ongoing road upgrades, canal rehabilitation, and urban development across the city, are driving explosive demand for high-quality construction aggregates and manufactured sand. The Vietnam Construction Sand and Gravel Market was estimated at $788 million in 2025** and is projected to reach **$1,132 million by 2032, growing at a CAGR of 5.3%. For quarry operators and contractors supplying material to Ho Chi Minh City‘s booming construction sector, a 100 TPH sand washing plant for manufactured sand is no longer optional—it is essential infrastructure.

Manufactured Sand: The Solution to Vietnam’s Natural Sand Crisis

Vietnam faces a critical shortage of natural river sand. In Thanh Hoa province alone, construction sand demand for 2026–2030 is projected to exceed 45 million m³, yet natural sand resources total only about 4.4 million m³—less than 10% of the projected demand. Nationally, the demand for construction sand in the 2026–2030 period is projected to exceed 45 million m³, while current supply capacity meets only about 16 million m³. This widening supply-demand gap, combined with increasing environmental restrictions on river sand extraction, has made manufactured sand the strategic solution for Vietnam’s construction industry. Produced by crushing and shaping rock (typically limestone, granite, or basalt) through VSI crushers, manufactured sand offers consistent quality, controlled gradation, and reliable supply independent of seasonal river conditions. However, manufactured sand contains fines, dust, and clay that must be removed through washing to meet the stringent quality standards required for concrete, mortar, and asphalt applications. A 100 TPH sand washing plant delivers the capacity and efficiency needed to transform crushed rock into specification-grade manufactured sand for Ho Chi Minh City‘s demanding construction projects.

Why Sand Washing Is Essential for Manufactured Sand Production

Raw manufactured sand from VSI crushers typically contains significant amounts of minus-75 micron fines, including rock dust, clay, and other impurities that can adversely affect concrete workability, strength, and durability. For manufactured sand to meet Vietnamese construction standards—and the requirements of major infrastructure projects like Long Thanh Airport and the metro expansions—it must be properly washed, classified, and dewatered. Modern sand washing plants incorporate hydrocyclone technology, dewatering screens, and water recycling systems to deliver in-spec product while minimising water consumption. A well-designed washing plant can recover fine sand particles down to 53 microns (and in some configurations down to 45 microns), ensuring maximum product recovery and minimal waste. The integration of closed-loop water systems is an emerging trend in the industry, enabling operators to recycle up to 90% of process water—a critical advantage in regions where water availability and environmental compliance are increasingly important. For operators targeting 100 TPH manufactured sand production in Ho Chi Minh City, investing in a modern washing plant is not merely about product quality—it is about operational sustainability and long-term profitability.

Key Parameters for a 100 TPH Manufactured Sand Washing Plant

Selecting the right sand washing plant for a 100 TPH manufactured sand application requires careful evaluation of several critical parameters:

• Feed Material: Manufactured sand from VSI crushers typically has a particle size range of 0–5 mm, with a significant proportion of fines. The washing plant must be capable of handling this feed while effectively removing minus-75 micron particles.

• Hydrocyclone Configuration: Hydrocyclones are the core of modern sand washing systems, using centrifugal force to separate fines from clean sand. For a 100 TPH application, multiple hydrocyclones (typically 2–4 units) are configured to achieve the desired cut point—usually around 75 microns.

• Dewatering Screen: A high-frequency dewatering screen removes excess moisture from the washed sand, producing a product with 10–15% moisture content suitable for concrete production. The screen deck should be equipped with polyurethane panels for extended wear life.

• Water Recycling System: An integrated water management system with a paste thickener enables high water recovery and low chemical consumption. This is particularly valuable in urban areas like Ho Chi Minh City where water costs and environmental regulations are significant considerations.

• Total Installed Power: A 100 TPH sand washing plant typically requires 150–250 kW of installed power, depending on the configuration and level of automation.

All model data are under continuous R&D; please contact our online team for the latest specifications tailored to your application. OCP Mechanical Company‘s engineering team can recommend the optimal hydrocyclone configuration, screen deck design, and water management system based on your specific feed characteristics and product requirements.

The Vietnam Crushing Equipment Market: A Sector Poised for Growth

The Vietnam Stone Crushing Equipment Market was estimated at $165 million in 2025** and is projected to reach **$233 million by 2032, growing at a CAGR of 5.1%. The broader Vietnam Crushers Market was estimated at $263 million in 2025** and is projected to reach **$371 million by 2032 at a CAGR of 5.0%. This growth is driven by continuous infrastructure development, urbanisation, and increasing demand for efficient, durable crushing and screening equipment. Chinese equipment manufacturers currently hold approximately 55% of the Vietnamese crusher market, leveraging competitive pricing and established supply chains. For Vietnamese quarry operators and contractors, this market context reinforces the commercial rationale for investing in high-quality, cost-effective crushing and screening plants and sand washing equipment that can deliver the capacity and reliability needed to capitalise on the country‘s infrastructure boom.

Government Policies and Trade Incentives That Reduce Your Investment

Several factors make the 100 TPH sand washing plant for manufactured sand in Ho Chi Minh City more accessible for Vietnamese operators. Vietnam‘s participation in the ASEAN-China Free Trade Area (ACFTA) and the Regional Comprehensive Economic Partnership (RCEP) means that equipment imports from member countries may qualify for reduced or zero duty rates, subject to submission of appropriate certificates of origin. Chinese equipment benefits from most-favoured-nation treatment across ASEAN countries, with whole-machine tariffs typically between 0% and 5%. The Vietnamese government‘s commitment to infrastructure development—including the Long Thanh Airport, metro expansions, and the national expressway network—has created a favourable environment for capital equipment investment. For quarry operators and contractors in Ho Chi Minh City and the surrounding provinces, these trade incentives can significantly reduce the effective equipment cost, improving project ROI and accelerating payback periods. When you work with OCP Mechanical Company, our team can assist with documentation and compliance to help you take full advantage of these trade benefits.

OCP Mechanical Company: Factory-Direct Washing Solutions for Vietnam‘s Growing Market

With over 40 years of manufacturing experience and exports to more than 180 countries and regions worldwide, OCP Mechanical Company brings proven expertise to Vietnam‘s expanding construction and quarrying sector. Our product range includes sand washing plants, jaw crushers, impact crushers, cone crushers, VSI crushers, vibrating screens, feeders, and complete crushing and screening plants—all brand-new and built to rigorous quality standards. As a direct factory manufacturer, we eliminate distributor margins, passing the savings directly to you. This is particularly valuable in the Vietnamese market, where import costs and logistics can add significant expense to capital equipment purchases. All price information provided is for reference only; final quotes depend on equipment configuration, shipping terms, optional features, and current exchange rates. Our engineering team works closely with each customer to design custom sand washing plants that match specific site conditions, feed characteristics, and production targets. Whether you are processing manufactured sand for Long Thanh Airport, Ho Chi Minh City‘s metro expansions, or other major infrastructure projects, we have the equipment and expertise to support your success. Product specifications are continuously updated; please consult our online customer service for the latest technical parameters tailored to your application.

Complete Sand Washing Solutions and After-Sales Support for Vietnamese Operations

A sand washing plant is most effective when integrated into a complete manufactured sand production line. OCP Mechanical Company supplies complete sand making and washing plants that include a primary jaw crusher for initial reduction, a secondary cone crusher or impact crusher for further size reduction, a VSI crusher for shaping and sand production, and a sand washing plant for final product cleaning, classification, and dewatering. Our screening equipment ensures effective separation at various sizes, maximising product recovery and minimising waste. Every component is matched to the capacity of your 100 TPH sand washing plant for manufactured sand in Ho Chi Minh City, preventing bottlenecks and ensuring smooth continuous operation across multiple shifts. With a focus on durability and serviceability, our equipment is designed to keep your plant running reliably in the demanding conditions typical of Vietnamese quarry operations—including high humidity, tropical temperatures, and dusty operating environments. Our after-sales support includes remote diagnostics, spare parts delivery, and wear-part prediction services to minimise downtime and extend equipment life. With a 40-year track record of reliability and customer satisfaction, we have built lasting relationships with clients across the globe—relationships based on trust, performance, and mutual success.

Your Next Step: Get a Custom Quote for Your Ho Chi Minh City Project

Ho Chi Minh City‘s infrastructure transformation—from the 11 projects worth over VND 181,000 billion to the Long Thanh Airport, metro expansions, and ongoing urban development—presents a significant opportunity for aggregates producers and contractors. A 100 TPH sand washing plant for manufactured sand from OCP Mechanical Company delivers the capacity, efficiency, and reliability needed to meet project demands while producing specification-grade material for Vietnam‘s most demanding construction applications. Our online customer service is available 24 hours a day, seven days a week, to provide free consultations, updated price references, and equipment selection guidance. Click the chat button now to discuss your project with a specialist—we are ready to help you build a more efficient and profitable manufactured sand processing operation in Vietnam.